Start Switch
CAUTION:
Sound horn before starting engine to clear people away from the combine.
To avoid the possibility of personal injury or death, start the engine ONLY from the operator's seat. Do not start engine by shorting across starter terminals. Combine will start in gear if normal circuit is bypassed.
Start switch is located on right side of steering column. Key positions are:
| First Position (O)... Off |
| Second Position (I)... Accessories |
| Third Position (II)... Accessories and Run |
| Fourth Position (III)... Start |
Turn key to the fourth position to start. All lights on the warning display panel will come on.
When released, it will return to run or third position.
If engine will not crank, check for:
-
Multi-function lever in neutral
-
Separator OFF
-
Header OFF
-
Auger swing switch in neutral
-
Unloading auger OFF
The decal (A) on the storage box lid shows engine starting information.
|