Warming Up Engine
After engine starts, let it run at low idle for 1-4 minutes to warm the oil.
All lights except the park brake must be out. If any other lights stay on, stop the engine and correct.
IMPORTANT:
Never run engine without load for more than 5 minutes.
NOTE:
If Stop Engine Code (1) is displayed - The triple display tachometer will stop normal function and the (Diagnostic Trouble Code) DTC will be displayed. This indicates a problem that requires the combine be stopped, the engine turned off immediately and the problem corrected. The triple display tachometer will show the DTC until the problem is resolved. If the problem cannot be resolved, see your John Deere dealer
|