Diagnostic Addresses - C03 Cornerpost Control Unit, con't

Control Unit Add. Middle Line Lower Line Description Details
Cornerpost
C03
119 _ _ _ _ _ _ _ n DISPLAY/MODIFY: Concave type 0 = undefined
1 = Rasp Bar a
2 = Spike Tooth
3 = STS Concave
Cornerpost
C03
120 _ _ _ _ 1xxx DISPLAY/MODIFY: Header Height Resume 1 = Installed a
0 = Not installed
Cornerpost
C03
120 _ _ _ _ x1xx DISPLAY/MODIFY: Header Height Sensing 1 = Installed a
0 = Not installed
Cornerpost
C03
120 _ _ _ _ xx1x DISPLAY/MODIFY: Float 1 = Installed a
0 = Not installed
Cornerpost
C03
120 _ _ _ _ xxx1 DISPLAY/MODIFY: Reel Resume 1 = Installed a
0 = Not installed
Cornerpost
C03
121 _ _ _ _ xxx1 DISPLAY/MODIFY: PWM Valve 1 = PWM Header Height Valve Installed a
0 = On/Off Header Height Valve installed
Cornerpost
C03
121 _ _ _ _ 1xxx DISPLAY/MODIFY: Automatic Header Control 1 = Installed a
0 = Not installed
Cornerpost
C03
121 _ _ _ _ x1xx DISPLAY/MODIFY: Deck Plate Adjust 1 = Installed a
0 = Not installed
Cornerpost
C03
121 _ _ _ _ xx1x DISPLAY/MODIFY: Dial-A-Speed Header Control 1 = Reserved
0 = Not installed a
Cornerpost
C03
122 _ _ _ _ 1xxx DISPLAY/MODIFY: Reel Height Valve 1 = 2 Valve Stack a
0 = Reel Raise/Lower Single Valve
Cornerpost
C03
122 _ _ _ _ x1xx DISPLAY/MODIFY: Cornerpost Display Unit 3 1 = Installed a
0 = Not installed
Cornerpost
C03
122 _ _ _ _ xx1x DISPLAY/MODIFY: Area Counter 1 = Installed a
0 = Not installed
Cornerpost
C03
123 _ _ _ _ 1xxx DISPLAY/MODIFY: Tailings Sensor 1 = Installed a
0 = Not installed
Cornerpost
C03
123 _ _ _ _ x1xx DISPLAY/MODIFY: Chopper Vane Angle 1 = Installed
0 = Not installed
Cornerpost
C03
124 _ _ _ _ nnnn DISPLAY/MODIFY: Engine Hours Time (shown in hours)
Cornerpost
C03
125 _ _ _ _ nnnn DISPLAY/MODIFY: Separator Hours Time (shown in hours)
Cornerpost
C03
126 _ _ _ _ 1xxx DISPLAY/MODIFY: Clock Set 0 = All machines
Cornerpost
C03
127 _ _ _ _ _ _ nn DISPLAY/MODIFY: Clock (12 or 24 hour) and Clock Enable 0 = not installed
1 = 12 hour clock installed
2 = 24 hour clock installed
Cornerpost
C03
128 _ _ _ _ _ _ _ x CALIBRATION: Concave Calibration (Interactive)  
aMust be selected for CTS combine

 

AG,OUZXMAY,305 -19-18FEB00-1/2


Control Unit Add. Middle Line Lower Line Description Details
Cornerpost
C03
129 _ _ _ _ _ _ nn DISPLAY/MODIFY: Engine power level 0 = No Power
11 = 9650CTS a
Cornerpost
C03
227 _ _ nn nnnn DISPLAY: Part number of the boot block program  
Cornerpost
C03
228 _ _ _ _ nnnn DISPLAY: Version number of the boot block program  
Cornerpost
C03
233 _ _ nn nnnn DISPLAY: Base program part number  
aMust be selected for CTS combine

 

AG,OUZXMAY,305 -19-18FEB00-2/2