| Control Unit |
Add. |
Middle Line |
Lower Line |
Description |
Details |
Header
E01 |
147 |
_ _ _ _ |
_ nnn |
DISPLAY: Header height |
Input from Header Height Sensor
Range = 0 - 127 |
Header
E01 |
148 |
_ _ _ _ |
_ nnn |
DISPLAY: Header tilt position (left - right) from Automatic Header Control Sensor |
Input from Automatic Header Control Sensor.
0 = level
As the right end goes down the number increases from 0 towards 127 As the left end goes down, the number decreases from 255 towards 128 |
Header
E01 |
150 |
nnnn |
xxxx |
DISPLAY: Header raise valve current (mA) |
Shown in milliamperes.
Range = 0 - 3400 |
Header
E01 |
150 |
xxxx |
nnnn |
DISPLAY: Header lower valve current (mA) |
Shown in milliamperes.
Range = 0 - 3400 |
Header
E01 |
151 |
_ _ _ _ |
_ nnn |
DISPLAY: Lift cylinder pressure |
Shown in bar
( kPa = bar X 100 )
( PSI = bar / 0.06894 ) |
Header
E01 |
152 |
_ _ _ n |
nnnn |
DISPLAY: calibrated header types |
List of calibrated headers by type. Rotate encoder to scroll through list. Top line of display is header number. Bottom line of display is header type.
0 = n/a
1 = n/a
2 = Row Crop Header w/ Contacting Height Sensors
3 = Row Crop
4 = Corn Head w/ Contacting Height Sensors
5 = n/a
8 = Rigid Platform
9 = n/a
14 = no header connected
15 = n/a |
Header
E01 |
227 |
_ _ nn |
nnnn |
DISPLAY: Part number of the boot block program |
|
Header
E01 |
228 |
_ _ _ _ |
_ nn.n |
DISPLAY: Version number of the boot block program |
|
Header
E01 |
233 |
_ _ nn |
nnnn |
DISPLAY: Base program part number |
|
Header
E01 |
234 |
_ _ _ _ |
nnn.n |
DISPLAY: Base program version number |
|
Header
E01 |
235 |
_ _ nn |
nnnn |
DISPLAY: Device part number |
|