|
Combine Will Not Move When 4-Wheel Drive Is Engaged.
|
One or both rear wheels in spin-out condition.
|
Increase hydrostatic pump flow by moving hydrostatic control lever forward.
|
|
|
Bad electrical control switch on console.
|
Replace switch.
|
|
|
Bad solenoid valve on control valve.
|
See your John Deere dealer.
|
|
|
Spool will not work in control valve.
|
See your John Deere dealer.
|
|
Combine Will Not Move When 4-Wheel Drive Is Disengaged.
|
Faulty line or connection between main system and rear wheel drive control valve.
|
Repair or replace parts as needed.
|
|
4-Wheel Drive Will Not Disengage.
|
Bad electrical control switch on console.
|
Replace switch.
|
|
|
Bad solenoid valve on control valve.
|
See your John Deere dealer.
|
|
|
Spool will not work in control valve.
|
See your John Deere dealer.
|
|
Rear Wheels Do Not Stay In Straight Ahead Position During Transport Speeds.
|
Toe-in out of adjustment.
|
Adjust toe-in. See your John Deere dealer.
|