|
1.
Engine Crankcase Filter (A) - Remove old filter and seal. Coat new seal with oil and install new filter.
2.
Engine Crankcase-Turn handle (B) to drain oil into a bucket.
IMPORTANT:
Change oil every 100 hours if fuel contains more than 0.7 per cent sulfur. Change oil every 250 hours
|
when using TORQ-GARD SUPREME
®
PLUS-50
®
.
3.
Engine Filler Cap (C)-Pull cap to fill. Check oil at dipstick (D) after filling.
IMPORTANT:
Do not operate engine with oil level below low mark on dipstick.
4.
Engine Fan Hub.
|