| Control Unit |
Add. |
Middle Line |
Lower Line |
Description |
Details |
Right
E02 |
1 |
nnnn |
nn.nn |
Diagnostic Trouble Codes |
"none" - indicates there are no Diagnostic Trouble Codes
"code" - indicates there are Diagnostic Trouble Codes available.
Push ENTER button to view codes. Use UP ARROW and DOWN ARROW to scroll through list of codes. |
Right
E02 |
2 |
_ _ _ _ |
nnnn |
BEEP: Right Control Unit Beep Mode |
The system will show the diagnostic address of any input that changes. Pushing the Enter Button will navigate to that address to display the status of that input. |
Right
E02 |
10 |
_ _ _ _ |
_ nn.n |
DISPLAY: EMIP Power (CC #23) to Right Control Unit at X141, Pin M1. This is used to power the control unit. |
Analog voltage shown in Volts DC. Battery Voltage |
Right
E02 |
11 |
_ _ _ _ |
nn.nn |
DISPLAY: CAN Bus Low › analog voltage |
Analog voltage shown in Volts DC |
Right
E02 |
12 |
_ _ _ _ |
nn.nn |
DISPLAY: CAN Bus High › analog voltage |
Analog voltage shown in Volts DC |
Right
E02 |
13 |
_ _ _ _ |
nn.nn |
DISPLAY: Main Gearcase Oil Temperature Input Voltage |
Analog voltage shown in Volts DC |
Right
E02 |
14 |
_ _ _ _ |
nn.nn |
DISPLAY: Hydraulic Oil Temperature Input Voltage |
Analog voltage shown in Volts DC |
Right
E02 |
15 |
_ _ _ _ |
nn.nn |
DISPLAY: Fuel Sensor Input Voltage |
Analog voltage shown in Volts DC |
Right
E02 |
16 |
_ _ _ _ |
nn.nn |
DISPLAY: Chopper Vane Angle Output Voltage |
Analog voltage shown in Volts DC |
Right
E02 |
17 |
_ _ _ _ |
_ nn.n |
DISPLAY: Chopper Vane Angle Input Voltage |
Analog voltage shown in Volts DC |
Right
E02 |
30 |
_ _ _ _ |
nnnn |
DISPLAY: Right Shoe Sensor strike count |
Entering the diagnostic mode zeroes the counts at addresses 030, 031, 032, and 033. Strikes on each Visiontrak sensor are counted. This address displays the Right Shoe Sensor strike count. |
Right
E02 |
31 |
_ _ _ _ |
nnnn |
DISPLAY: Left Shoe Sensor strike count |
Entering the diagnostic mode zeroes the counts at addresses 030, 031, 032, and 033. Strikes on each Visiontrak sensor are counted. This address displays the Left Shoe Sensor strike count. |
Right
E02 |
32 |
_ _ _ _ |
nnnn |
DISPLAY: Right Separator Sensor strike count |
Entering the diagnostic mode zeroes the counts at addresses 030, 031, 032, and 033. Strikes on each Visiontrak sensor are counted. This address displays the Right Separator Sensor strike count. |