| Engine: |
Make...John Deere |
| |
Model...6081HH004 |
| |
Type...six-cylinder, inline, valve-in-head, air-to-air aftercooled diesel turbocharged |
| |
Power (according to ECE-R24) at
rated speed with direct fan drive...225 kW (305 hp) |
| |
Bulge power...243 kW (331 hp) at 2100 rpm |
| |
Boost and Bulge power...268 kW (365 hp) at 2100 rpm |
| |
Engine rated speed...2200 rpm |
| |
Displacement...8.1L (496 cu.in.) |
| |
Bore and Stroke:...116 x 121 mm (4.56 x 4.75 in.) |
| |
Firing Order...1-5-3-6-2-4 |
| |
Air Cleaner...Dry Type with Safety Element |
| |
Thermostats (Two)...82°C (180°F) |
| |
|
| Electrical System: |
...12 volt, negative ground with 185 amp alternator |
| |
|
| Transmission: |
...three speeds |
| |
|
| Brakes: |
...hydraulic shoe |
| |
|
| Cylinder: |
Types...rasp bar or spike tooth |
| |
Diameter...660 mm (26 in.) |
| |
Width...1397 mm (55 in.) |
| |
Number of bars: |
| |
rasp bar...10 |
| |
spike tooth...12 |
| |
|
| Concave: |
Types...13 open bar or spike tooth |
| |
Area...0.81 sq. m (8.7 sq. ft.) |
| |
|
| Beater: |
Diameter...396 mm (15-1/2 in.) |
| |
Number of wings...8 |
| Finger Bar: |
Type...adjustable |
| |
Area...0.48 sq. m (744 sq. in.) |
| |
|
| Tine Separator: |
Diameter feed section (front)...464 mm (18.27 in.) |
| |
|
| |
Diameter separator section (rear)...502 mm (19.76 in.) |
| |
Separator speed...Dual speed 740/540 rpm |
| |
Total separating area...Rice 1.4 m2 (2199 sq.in.) Small Grain 2.0 m2 (3168 sq. in.) |
| |
Beater overshot diameter...418 mm (16.5 in.) |
| |
Beater overshot speed...700-1100 rpm |
| |
Beater undershot diameter...140 mm (5.5 in.) |
| |
Beater undershot speed/cylinder ratio...1.25 |
| |
Separator powershaft speed...1500 rpm |
| |
|
| Cleaning Shoe: |
|
| |
Chaffer width...1286 mm (51 in.) |
| |
Chaffer length...1220 mm (48 in.) |
| |
Sieve width...1286 mm (51 in.) |
| |
Sieve length...1159 mm (46 in.) |
| |
Precleaner width...1286 mm (51 in.) |
| |
Precleaner length...840 mm (33 in.) |
| |
Total area...4.11 m2(6370 sq. in.) |
| Weight: |
Less header...14825 kg (32615 lb.) on 9780 CTS standard |
| |
Less header...15585 kg (34287 lb.) on 9780 CTS Hillmaster |
| |
|
| Capacities: |
Fuel tank...700 L (185 U.S.gal) |
| |
Cooling system (with heater)...40 L (10.56 U.S.gal) |
| |
Engine crankcase (with filter)...28.5 L (7.53 U.S.gal) |
| |
Transmission...9.6 L (2.53 U.S.gal) |
| |
Final Drives (each)...8.5 L (2.24 U.S.gal) |
| |
Feeder House Reverser Gearcase w/Oil Cooler...3.5 L (0.92 U.S.gal) |
| |
Primary Countershaft Gearcase...2.1 L (0.55 U.S.gal) |
| |
Dual-Range Cylinder Drive Gearcase...1.9 L (0.50 U.S.gal) |
| |
Engine Gearcase...16 L (4.22 U.S.gal) |
| |
Feed Auger Gearcase...3.8 L (1.00 U.S.gal) |
| |
Hydraulic/Hydrostatic Reservoir...34 L (8.98 U.S.gal) |
| |
Tine Separator Gearcase...2.2 L (0.58 U.S.gal) |