Cold Weather Starting Procedure With Ether Starting Aid

CAUTION: Starting fluid is highly flammable. DO NOT use near fire, sparks or flames. Read the caution information on the container. Protect container against damage. DO NOT carry extra or empty ether cans inside the operator's cab.

If starting fluid has not been used for several days, remove the fluid can. Check fluid and valve operation by reinstalling and depressing the spray nozzle. If no fluid is emitted, use a new can.

IMPORTANT: To assure proper lubrication, operate engine at approximately 1200 rpm with no load for 1 to 2 minutes. Extend this period to 2 to 4 minutes when operating at temperatures below freezing point.

ZX,OMCTS012144 -19-01SEP98-1/1