Removing Conveyor Chain Links

First Adjustment (Approximately 500 Hrs)

Remove offset links (A) for initial chain adjustment.

Second Adjustment (Approximately 1200 Hrs)

Remove inside link (B) and replace it with an offset link. Order (3) half links (C). The offset link now becomes the coupler link. Remove the top shaft end for end at the same time the half links are installed.

Repeat this procedure on all strands of chain.

When adjustment is all used up from step 2 the chain is worn out and should be replaced.

H42610

ZX,OMCTS012202 -19-01SEP98-1/1