|
As soon as the INFO-TRAK
™
monitor displays a three-digit number followed by an "E", a malfunction or error by the operator is indicated. The cause of a machine malfunction may be a broken wire etc.
IMPORTANT:
If no solution is given or if the problem cannot be eliminated, see your John Deere dealer.
|
If the indicator light in the r.h. part of the control unit flashes, a fault may have occurred in the datalink between the INFO-TRAK
™
and the control unit. Check the wiring, fuse (F32), the INFO-TRAK
™
monitor and the control unit.
|