Attaching Points for Harvesting Unit Lift Cylinders

CAUTION: Always insert the locking pin before working on raised header.

Depending on harvesting unit weight, choose the following attaching points for lift cylinders (A):

X-Attaching point for 2.14 m(7 ft), 3 m (10 ft) and 4.5 m (15 ft) pickup.

Y-Attaching point for 664, 665 and 666 row-crop units and rotary harvesting units 676 and 688.

Before working on raised harvesting unit, install locking pin (B) into guide (C).

Prior to field operation, insert locking pin (B) into the vacant attaching point on mounting (D).

A-Harvesting unit lift cylinder
B-Locking pin
C-Guide
D-Mounting
X-Light harvesting units
Y-Heavy harvesting units

ZXOMSPFH013184 -19-01MAY99-1/1