Adjusting Unit for Kernel Processor Rolls, Stationary Knife and Knife SharpeningKey A - Switches on automatic functions Key B - Switches on manual functions. Key C - Adjustment of kernel processor roll clearance. Automatic adjustment of preset roll clearance. Manual increase of roll clearance. Knob D - Adjustment of kernel processor roll clearance. Key E - Automatic adjustment of stationary knife. Manual increase of stationary knife-to-cutterhead knife clearance. Key F - Adjustment of sharpening cycles. Automatic performance of preset sharpening cycles. Manually return sharpening stone to home position. Knob G - Adjustment of sharpening cycles. |
|
ZX,OMSPFH000220 -19-26MAR91-1/1 |