|
When installing V-belts, slacken belt tensioners. Never use force and pry belt over edge of sheave, as this will rupture one or more cords and weaken the belt. V-belts stretch when new. Therefore, with a new belt, check belt tension several times during the first few days of use. More belts fail from insufficient tension than from excessive tension.
Never use an aggressive cleaner to clean V-belts. Do not use petrol, benzine, turpentine or similar cleaning solvents.
It is recommended to clean belts with a rag dipped in liquid ammonia, soap-suds or with a 1:10 glycerine spirit mixture.
|
The life of a V-belt also depends on sheave condition. A damaged sheave will also damage the V-belt.
A slight fraying of the belt cover does not indicate belt failure. The frayed ends should be cut off.
IMPORTANT:
At the end of the harvesting season, remove V-belts and store in a cool, dry place to prevent damage from the elements.
|