OMZ92984: 6650, 6750, 6850 and 6950 Self-Propelled Forage Harvesters (504992- ), Block File: ZX_OMSPFH001159_19

Checking Adjustment

Perform the following steps:

1. Move the two front shift rods at length-of-cut transmission into neutral position.

2. Tongue (A) is pointing upward (position "Operation With Metal Detector"). Locking pawl magnetic switch must be in the down position (i.e. not supplied with current) (I).

It should not be possible to turn the feed rolls forward by hand.

3. Move tongue (A) downward (position "Operation Without Metal Detector") (II).

It should now be possible to turn the feed rolls forward by hand.

ZX,OMSPFH001159 -19-01MAY94-1/1