OMZ92984: 6650, 6750, 6850 and 6950 Self-Propelled Forage Harvesters (504992- ), Block File: ZX_OMSPFH013189_19

Adjust the Service Cover On the Kernel Processor

Once the spiral floor has been adjusted (see the "Cutterhead, Drive, Guards, Covers" section), set the service cover (A) to the highest possible position. To do this, slacken off screws (B), push the service cover (A) up by hand, and then retighten the screws.

ZX,OMSPFH013189 -19-01MAY99-1/1