Using Liquid Weight

CAUTION: Installing liquid weight (ballast) requires special equipment and training. Have the job done by your John Deere dealer or a tire service store.

IMPORTANT: Cover rim completely with solution to avoid corrosion, but NEVER fill any tire more than 90 percent full. More solution would leave too little air space to absorb shocks. Damage to tire could occur.

A solution of water and calcium chloride provides safe, economical ballast. A tube should be used to prevent rusting of the rims. If used properly, it will not damage tires, tubes or rims.

OUO6075,0001753 -19-30MAY01-1/1