C03 Cornerpost Control Unit

Diagnostic Addresses - C03 Cornerpost Control Unit

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 1 nnnn nn.nn Diagnostic Trouble Codes "none" - indicates there are no Diagnostic Trouble Codes.
"code" - indicates there are Diagnostic Trouble Codes available.
Push ENTER button to view codes. Use ARROW-UP and ARROW-DOWN to scroll through list of codes.
Cornerpost C03 2 _ _ _ _ nnnn BEEP: System The system will show the diagnostic address of any input that changes. Pushing the Enter Button will navigate to that address to display the status of that input.
Cornerpost C03 3 _ _ _ _ nnnn BEEP: Analog The system will show the diagnostic address of any analog input that changes. Pushing the Enter Button will navigate to that address to display the status of that input.
Cornerpost C03 4 _ _ _ _ nnnn BEEP: Frequency The system will show the diagnostic address of any frequency input that changes. Pushing the Enter Button will navigate to that address to display the status of that input.
Cornerpost C03 5 _ _ _ _ nnnn BEEP: Discrete Digital The system will show the diagnostic address of any discrete digital input that changes. Pushing the Enter Button will navigate to that address to display the status of that input.
Cornerpost C03 10 _ _ _ _ nn.nn DISPLAY: Delayed Power (cc# 006) voltage Analog voltage shown in Volts DC
Cornerpost C03 11 _ _ _ _ nn.nn DISPLAY: CAN Hi (cc# 965) voltage Analog voltage shown in Volts DC
Cornerpost C03 12 _ _ _ _ nn.nn DISPLAY: CAN Lo (cc# 964) voltage Analog voltage shown in Volts DC
Cornerpost C03 13 _ _ _ _ _n.nn DISPLAY: Cornerpost Sensor Power (cc# 801) voltage Analog voltage shown in Volts DC
Cornerpost C03 14 _ _ _ _ nn.nn DISPLAY: Concave Clearance (cc# 802) voltage Analog voltage shown in Volts DC
Cornerpost C03 15 _ _ _ _ nn.nn DISPLAY: Dimmer Output Signal (cc# 579) voltage. Field or Road Lights must be on. Analog voltage shown in Volts DC
Cornerpost C03 17 _ _ _ _ nn.nn DISPLAY: CLIMATRAK Fan Setpoint Signal (cc# 937) voltage Analog voltage shown in Volts DC
Cornerpost C03 18 _ _ _ _ nn.nn DISPLAY: CLIMATRAK Temperature Setpoint (cc# 927) voltage Analog voltage shown in Volts DC
Cornerpost C03 21 _ _ _ _ nnn.n DISPLAY: Cylinder (Threshing) Speed Shown in Hertz
Cornerpost C03 22 _ _ _ _ nnn.n DISPLAY: Cleaning Fan Speed Shown in Hertz

 

OUZXMAG,00018AA -19-10OCT02-1/11

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 30 1xxx xxxx DISPLAY: Engine Speed Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 30 x1xx xxxx DISPLAY: Cylinder (Threshing) Speed Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 30 xx1x xxxx DISPLAY: Concave (Threshing) Clearance Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 30 xxx1 xxxx DISPLAY: Arrow-Up/Down Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 30 xxxx 1xxx DISPLAY: Clock Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 30 xxxx x1xx DISPLAY: Cleaning Fan Speed Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 30 xxxx xx1x DISPLAY: Header Backshaft Speed Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 30 xxxx xxx1 DISPLAY: Hourmeter Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 31 1xxx xxxx DISPLAY: Calibrate Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 31 x1xx xxxx DISPLAY: Arrow-Up Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 31 xx1x xxxx DISPLAY: Back Arrow Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 31 xxx1 xxxx DISPLAY: Diagnostics Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 31 xxxx 1xxx DISPLAY: Seed Size Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 31 xxxx x1xx DISPLAY: Arrow-Down Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 31 xxxx xx1x DISPLAY: Enter Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 31 xxxx xxx1 DISPLAY: Area Counter Button status 1 = switch pushed
0 = switch released
3 = undefined input

 

OUZXMAG,00018AA -19-10OCT02-2/11

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 32 1xxx xxxx DISPLAY: HEADERTRAK - Stubble Height Enable Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 32 x1xx xxxx DISPLAY: Header Width Enable Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 32 xx1x xxxx DISPLAY: DIAL-A-SPEED Enable Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 32 xxx1 xxxx DISPLAY: HEADERTRAK - Ground Pressure Enable Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 32 xxxx 1xxx DISPLAY: HEADERTRAK - Return to Cut Enable Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 32 xxxx xx1x DISPLAY: HEADERTRAK - Tilt Enable Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 32 xxxx xxx1 DISPLAY: Reel Resume Enable Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 33 x1xx xxxx DISPLAY: Automatic Combine Adjust Arrow-Up Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 33 xx1x xxxx DISPLAY: Automatic Combine Adjust Back Button (Abort) status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 33 xxx1 xxxx DISPLAY: Automatic Combine Adjust Cal Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 33 xxxx x1xx DISPLAY: Automatic Combine Adjust Arrow-Down Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 33 xxxx xx1x DISPLAY: Automatic Combine Adjust Enter Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 33 xxxx xxx1 DISPLAY: Automatic Combine Adjust Auto Button status 1 = switch pushed
0 = switch released
3 = undefined input
Cornerpost C03 34 _ _ _ _ 1xxx DISPLAY: CLIMATRAK Defog Switch 1 = closed
0 = open
3 = undefined input
Cornerpost C03 34 _ _ _ _ x1xx DISPLAY: CLIMATRAK ON Switch 1 = closed
0 = open
3 = undefined input
Cornerpost C03 34 _ _ _ _ xx1x DISPLAY: CLIMATRAK AUTO Switch 1 = closed
0 = open
3 = undefined input

 

OUZXMAG,00018AA -19-10OCT02-3/11

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 34 _ _ _ _ xxx1 DISPLAY: Panel Lamps (cc# 509) driver status 1 = output normal
0 = output shorted or open
Cornerpost C03 35 1xxx xxxx DISPLAY: Beacon AUTO Light Switch 1 = closed
0 = open
3 = undefined input
Cornerpost C03 36 xxxx xxxx DISPLAY: Unused  
Cornerpost C03 40 1xxx xxxx DISPLAY: CAN Bus message from Armrest Control Unit - Cylinder (Threshing) Speed Button status 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 40 x1xx xxxx DISPLAY: CAN Bus message from Armrest Control Unit - Concave (Threshing) Clearance Button status 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 40 xx1x xxxx DISPLAY: CAN Bus message from Armrest Control Unit - Cleaning Fan Speed Button status 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 40 xxx1 xxxx DISPLAY: CAN Bus message from Armrest Control Unit - Header Engage Switch status 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 40 xxxx 1xxx DISPLAY: CAN Bus message from Armrest Control Unit - Separator Engage Switch status 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 41 1xxx xxxx DISPLAY: CAN Bus message from Armrest Control Unit - Backshaft Speed Button status 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 42 1xxx xxxx DISPLAY: CAN Bus message from Right Control Unit - Visiontrak Left Shoe Sensor 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 42 x1xx xxxx DISPLAY: CAN Bus message from Right Control Unit - Visiontrak Right Shoe Sensor 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 42 xx1x xxxx DISPLAY: CAN Bus message from Right Control Unit - Visiontrak total loss 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 42 xxx1 xxxx DISPLAY: CAN Bus message from Right Control Unit - Visiontrak Left Separator Sensor 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 42 xxxx 1xxx DISPLAY: CAN Bus message from Right Control Unit - Visiontrak Right Separator Sensor 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 42 xxxx x1xx DISPLAY: CAN Bus message from Right Control Unit - Visiontrak Seed Size 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 42 xxxx xx1x DISPLAY: CAN Bus message from Right Control Unit - Visiontrak calibration 1 = message received
0 = message not received
3 = undefined input

 

OUZXMAG,00018AA -19-10OCT02-4/11

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 42 xxxx xxx1 DISPLAY: CAN Bus message from Right Control Unit - Chopper Vane Angle 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 43 1xxx xxxx DISPLAY: CAN Bus message from Right Control Unit - Fuel Level 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 44 1xxx xxxx DISPLAY: CAN Bus message from Engine Control Unit - Engine Speed 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 44 x1xx xxxx DISPLAY: CAN Bus message from Engine Control Unit - Engine coolant temperature 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 44 xx1x xxxx DISPLAY: CAN Bus message from Master Tailings Sensor - Tailings volume 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 45 1xxx xxxx DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Return to Cut Enabled 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 45 x1xx xxxx DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Stubble Height Enabled 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 45 xx1x xxxx DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Tilt Enabled 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 45 xxx1 xxxx DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Ground Pressure Control Enabled 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 45 xxxx 1xxx DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Return to Cut active 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 45 xxxx x1xx DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Stubble Height active 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 45 xxxx xx1x DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Tilt active 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 45 xxxx xxx1 DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Ground Pressure active 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 46 1xxx xxxx DISPLAY: CAN Bus message from Header Control Unit - Reel Resume Enabled 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 46 x1xx xxxx DISPLAY: CAN Bus message from Header Control Unit - Reel Resume active 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 46 xx1x xxxx DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Stubble Height data 1 = message received
0 = message not received
3 = undefined input

 

OUZXMAG,00018AA -19-10OCT02-5/11

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 46 xxx1 xxxx DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Tilt display data 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 46 xxxx 1xxx DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Ground Pressure Pressure data 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 46 xxxx x1xx DISPLAY: CAN Bus message from Header Control Unit - HEADERTRAK - Stubble Height percent data 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 46 xxxx xx1x DISPLAY: CAN Bus message from Header Control Unit - Deck plate position 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 46 xxxx xxx1 DISPLAY: CAN Bus message from Header Control Unit - Deck Plate status data 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 47 1xxx xxxx DISPLAY: CAN Bus message from Header Control Unit - DIAL-A-SPEED Enabled 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 47 x1xx xxxx DISPLAY: CAN Bus message from Header Control Unit - DIAL-A-SPEED Active 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 47 xx1x xxxx DISPLAY: CAN Bus message from Header Control Unit - DIAL-A-SPEED ratio display data 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 47 xxx1 xxxx DISPLAY: CAN Bus message from Header Control Unit - HYDRAFLEX Enabled 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 47 xxxx xx1x DISPLAY: CAN Bus message from Header Control Unit - Harvesting status 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 47 xxxx xxx1 DISPLAY: CAN Bus message from Header Control Unit - Header width data 1 = message received
0 = message not received
3 = undefined input
Cornerpost C03 48 xxxx xxxx DISPLAY: unused  
Cornerpost C03 60 _ _ _ _ nnn.n DISPLAY: Engine Coolant Temperature Shown in °C/°F
Cornerpost C03 70 _ _ _ _ _ nnn DISPLAY: Accumulated Service Interval Hours alarm cLr = Less than 45 hours
SEL = greater than 45 hours
Cornerpost C03 71 _ _ _ _ _ nnn DISPLAY: Accumulated Service Interval Hours Time (shown in hours)
Cornerpost C03 72 _ _ _ _ _ nnn DISPLAY: CLIMATRAK Recirculation Fan Speed setpoint Shown in percent
Cornerpost C03 73 _ _ _ _ _ nnn DISPLAY: CLIMATRAK Temperature Setpoint Shown in °C/°F
Cornerpost C03 100 _ _ _ _ _ _ _ n DISPLAY/MODIFY: User Factory 2 = Zweibrücken

 

OUZXMAG,00018AA -19-10OCT02-6/11

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 101 _ _ _ _ _ _ nn DISPLAY/MODIFY: Vehicle Model 14 = 9640, 9660, 9680
16 = 9540, 9560, 9580
Cornerpost C03 102 _ _ _ _ _ _ _ n DISPLAY/MODIFY: Engine Type 1 = 6068 (9540 and 9560 4-valves engine)
2 = 6081 (9560 2 valves-engine, 9580, 9640, 9660 and 9680)
Cornerpost C03 103 _ _ _ _ _ _ _ n DISPLAY/MODIFY: Engine Controller 4 = John Deere Level 9 (9560 2-valves engine, 9580, 9640, 9660 and 9680)
5 = John Deere Level 4 (9540 only)
6 = John Deere Level 11 (9560 4-valves engine only)
Cornerpost C03 104 _ _ _ _ _ _ _ n DISPLAY/MODIFY: Measurement units 1 = English
2 = Metric
Cornerpost C03 105 _ _ _ _ _ _ _n DISPLAY/MODIFY: Engine Alarm rpm 1 = 2000 (9560 2-valves engine, 9580, 9640, 9660 and 9680)
2 = 2200 (9540 and 9560 4-valves engine)
Cornerpost C03 106 _ _ _ _ _ _ nn DISPLAY/MODIFY: Cylinder (Threshing) Speed Alarm Percentage 80 = Default
Cornerpost C03 107 _ _ _ _ _ nnn DISPLAY/MODIFY: Ground Speed pulses per revolution 60 = Heavy Duty Single Reduction
Cornerpost C03 108 _ _ _ _ _ nnn DISPLAY/MODIFY: Cylinder (Threshing) Speed pulses per revolution 12 = Default in RegII
Cornerpost C03 109 _ _ _ _ _ nnn DISPLAY/MODIFY: Cleaning Fan Speed pulses per revolution 18 = Default
Cornerpost C03 110 _ _ _ _ _ nnn DISPLAY/MODIFY: Backshaft Speed pulses per revolution 18 = Default
Cornerpost C03 111 _ _ _ _ _ nnn DISPLAY/MODIFY: Engine Speed pulses per revolution 30 = Default
Cornerpost C03 112 _ _ _ _ nnnn DISPLAY/MODIFY: Tire Rolling Radius in Millimeters 797 = 900/55 R34 173 A8
803 = 24.5 X 32 - 165 A6
803 = 650/75 R32 167 A8
807 = 650/75 R32 172 A8
813 = 30.5LR X 32 - R1
814 = 800/65 R32 167 A8
815 = 650/75 R32 170 A8
816 = 800/65 R32 R1-W172 A8
821 = 1050/50 R32
852 = 680/75 R32 173 A8
885 = 710/75 R34 178 A8
Cornerpost C03 113 _ _ _ _ _ nnn DISPLAY/MODIFY: Drive Train Ratio 1 Numerator 95 = Heavy Duty Single Reduction
Cornerpost C03 114 _ _ _ _ _ nnn DISPLAY/MODIFY: Drive Train Ratio 1 Denominator 10 = Heavy Duty Single Reduction
Cornerpost C03 115 _ _ _ _ _ nnn DISPLAY/MODIFY: Drive Train Ratio 2 Numerator 1 = Default
Cornerpost C03 116 _ _ _ _ _ nnn DISPLAY/MODIFY: Drive Train Ratio 2 Denominator 1 = Default
Cornerpost C03 117 _ _ _ _ nnnn DISPLAY/MODIFY: Engine Coolant Temperature Alarm Shown in °C
115 = all engines

 

OUZXMAG,00018AA -19-10OCT02-7/11

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 118 _ _ _ _ _ _ nn DISPLAY/MODIFY: Fuel Level Alarm 11 = all machines
Cornerpost C03 119 _ _ _ _ _ _ _ n DISPLAY/MODIFY: Concave type 1 = Rasp Bar
2 = Spike Tooth
Cornerpost C03 120 _ _ _ _ 1xxx DISPLAY/MODIFY: Option Availability - HEADERTRAK - Return to Cut 1 = Installed
0 = Not installed
Cornerpost C03 120 _ _ _ _ x1xx DISPLAY/MODIFY: Option Availability - HEADERTRAK - Stubble Height 1 = Installed
0 = Not installed
Cornerpost C03 120 _ _ _ _ xx1x DISPLAY/MODIFY: Option Availability - HEADERTRAK - Ground Pressure 1 = Installed
0 = Not installed
Cornerpost C03 120 _ _ _ _ xxx1 DISPLAY/MODIFY: Option Availability - Reel Resume 1 = Installed
0 = Not installed
Cornerpost C03 121 _ _ _ _ 1xxx DISPLAY/MODIFY: Option Availability - HEADERTRAK - Tilt 1 = Installed
0 = Not installed
Cornerpost C03 121 _ _ _ _ x1xx DISPLAY/MODIFY: Option Availability - Deck Plate Adjust 1 = Installed
0 = Not installed
Cornerpost C03 121 _ _ _ _ xx1x DISPLAY/MODIFY: Option Availability - DIAL-A-SPEED 1 = Installed
0 = Not installed
Cornerpost C03 121 _ _ _ _ xxx1 DISPLAY/MODIFY: Option Availability - Dual or single detent Header Raise Lower Button 1 = Dual Detent
Cornerpost C03 122 _ _ _ _ 1xxx DISPLAY/MODIFY: Option Availability - Reel Height Valve 1 = Separate Reel Raise and Reel Lower Valves
Cornerpost C03 122 _ _ _ _ x1xx DISPLAY/MODIFY: Option Availability - Cornerpost Display Unit 3 1 = Installed
0 = Not installed
Cornerpost C03 122 _ _ _ _ xx1x DISPLAY/MODIFY: Option Availability - Area Counter 1 = Installed
0 = Not installed
Cornerpost C03 122 _ _ _ _ xxx1 DISPLAY/MODIFY: Option Availability - Remote Shoe Adjust 1 = Installed
0 = Not installed
Cornerpost C03 123 _ _ _ _ 1xxx DISPLAY/MODIFY: Option Availability - Tailings Sensor 1 = Installed
0 = Not installed
Cornerpost C03 123 _ _ _ _ x1xx DISPLAY/MODIFY: Option Availability - Chopper Vane Angle Adjust 1 = Installed
0 = Not installed
Cornerpost C03 123 _ _ _ _ xx1x DISPLAY/MODIFY: Option Availability - Automatic Combine Adjust 1 = Installed
0 = Not installed
Cornerpost C03 123 _ _ _ _ xxx1 DISPLAY/MODIFY: Option Availability - Cornerpost Display 3 & 4 Locations 0 = Cornerpost Display Unit 3 in third position and Cornerpost Display 4 in top of cornerpost
Cornerpost C03 124 _ _ _ _ nnnn DISPLAY/MODIFY: Engine Hours
IMPORTANT: When replacing a Cornerpost Control Unit, set Engine Power Level (Address C03-129) before setting Engine Hours (Address C03-124) .		 Time (shown in hours)

 

OUZXMAG,00018AA -19-10OCT02-8/11

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 125 _ _ _ _ nnnn DISPLAY/MODIFY: Separator Hours
IMPORTANT: When replacing a Cornerpost Control Unit, set Engine Power Level (Address C03-129) before setting Separator Hours (Address C03-125) .		 Time (shown in hours)
Cornerpost C03 126 _ _ _ _ 1xxx CALIBRATION: Clock Set 0 = All machines
Cornerpost C03 127 _ _ _ _ _ _ nn DISPLAY/MODIFY: Clock (12 or 24 hour) and Clock Enable 0 = not installed
1 = 12 hour clock installed
2 = 24 hour clock installed
Cornerpost C03 128 _ _ _ _ _ _ _ x CALIBRATION: Concave Calibration (Interactive)  
Cornerpost C03 129 _ _ _ _ _ _ nn DISPLAY/MODIFY: Engine power level
IMPORTANT: When replacing a Cornerpost Control Unit, set Engine Power Level (Address C03-129) before setting Engine Hours (Address C03-124) .		 108 = 9560
109 = 9640, 9580
110 = 9660
111 = 9680
160 = 9540
Cornerpost C03 130 _ _ _ _ nnnn DISPLAY/MODIFY: Model Year 2003 = Default
Cornerpost C03 131 _ _ _ _ nnnn DISPLAY/MODIFY: Language (reserved) 1 = English
2 = Reserved
3 = German
4 = French
5 = Italian
6 = Spanish
7 = Swedish
8 = Dutch
9 = Norwegian
10 = Danish
11 = Hungarian
12 = Czech
13 = Polish
14 = Bulgarian
15 = Romanian
16 = Estonian
17 = Latvian
18 = Lithuanian
19 = Russian
20 - 250 = Reserved
Cornerpost C03 132 _ _ _ _ 1xxx DISPLAY/MODIFY: Remote precleaner option type 0= Option not installed
1= CWS/CTS Precleaner
Cornerpost C03 132 _ _ _ _ x1xx DISPLAY/MODIFY: Remote chaffer option type 0= Option not installed
1= CWS/CTS Chaffer
Cornerpost C03 132 _ _ _ _ xx1x DISPLAY/MODIFY: Remote sieve option type 0= Option not installed
1= CWS/CTS Sieve
Cornerpost C03 132 _ _ _ _ xxx1 DISPLAY/MODIFY: Unused 1= unused

 

OUZXMAG,00018AA -19-10OCT02-9/11

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 134 _ _ _ _ _ _ _ _ DISPLAY/MODIFY: CLIMATRAK Fan Speed Adjust interactive calibration  
Cornerpost C03 135 _ _ _ _ _ _ _ _ DISPLAY/MODIFY: CLIMATRAK Temperature Adjust interactive calibration  
Cornerpost C03 136 nnnn nnnn DISPLAY/MODIFY: Total Machine Area Counter  
Cornerpost C03 137 nnnn nnnn CALIBRATION: Total Field Counter  
Cornerpost C03 138 nnnn nnnn CALIBRATION: Field Counter  
Cornerpost C03 140 _ _ _ _ 1xxx DISPLAY/MODIFY: Engine Low Speed Warning (cc# 632) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 140 _ _ _ _ x1xx DISPLAY/MODIFY: Threshing Low Speed Warning (cc# 633) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 140 _ _ _ _ xx1x DISPLAY/MODIFY: Engine Coolant Temperature Alarm (cc# 753) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 140 _ _ _ _ xxx1 DISPLAY/MODIFY: Engine Oil Pressure Warning (cc# 705) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 141 _ _ _ _ 1xxx DISPLAY/MODIFY: Low Fuel Alarm (cc# 655) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 141 _ _ _ _ x1xx DISPLAY/MODIFY: Hydraulic Oil Temperature Alarm (cc# 755) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 141 _ _ _ _ xx1x DISPLAY/MODIFY: Main Gearcase Oil Temperature Alarm (cc# 754) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 141 _ _ _ _ xxx1 DISPLAY/MODIFY: Engine Air Filter Restricted Alarm (cc# 703) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 142 _ _ _ _ x1xx DISPLAY/MODIFY: Grain Tank Cover Alarm (cc# 839) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 142 _ _ _ _ xx1x DISPLAY/MODIFY: Grain Tank 3/4 Full Warning (cc# 664) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 142 _ _ _ _ xxx1 DISPLAY/MODIFY: Grain Tank Full Warning (cc# 665) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 142 _ _ _ _ 1xxx DISPLAY/MODIFY: Multifunction Lever Out of Neutral Warning (cc# 812) 1 = ON
2 = Flashing
0 = OFF
Cornerpost C03 227 _ _ nn nnnn DISPLAY: Part number of the boot block program  

 

OUZXMAG,00018AA -19-10OCT02-10/11

Control Unit Add. Line 2 Line 3 Description Details
Cornerpost C03 228 _ _ _ _ nnnn DISPLAY: Version number of the boot block program  
Cornerpost C03 233 _ _ nn nnnn DISPLAY: Base program part number  
Cornerpost C03 234 _ _ _ _ nnnn DISPLAY: Base program version number  
Cornerpost C03 235 _ _ nn nnnn DISPLAY: Device part number  
Cornerpost C03 236 nnnn nnnn DISPLAY: Device serial number  
Cornerpost C03 247 _ _ _ _ _ _ nn DISPLAY: Machine Model Number 14 = 9640, 9660, 9680
16 = 9540, 9560, 9580

 

OUZXMAG,00018AA -19-10OCT02-11/11