| Control Unit |
Add. |
Line 2 |
Line 3 |
Description |
Details |
| Tailings E00 |
1 |
nnnn |
nn.nn |
Diagnostic Trouble Codes |
"none" - indicates there are no Diagnostic Trouble Codes.
"code" - indicates there are Diagnostic Trouble Codes available.
Push ENTER button to view codes. Use ARROW-UP and ARROW-DOWN to scroll through list of codes. |
| Tailings E00 |
2 |
_ _ _ _ |
nnnn |
BEEP: System |
The system will show the diagnostic address of any input that changes. Pushing the Enter Button will navigate to that address to display the status of that input. |
| Tailings E00 |
3 |
_ _ _ _ |
nnnn |
BEEP: Discrete digital beep mode |
The system will show the diagnostic address of any discrete digital input that changes. Pushing the Enter Button will navigate to that address to display the status of that input. |
| Tailings E00 |
30 |
_ _ _ _ |
1xxx |
DISPLAY: Slave Sensor detector #4 (furthest from elevator chain) |
1 = detecting light
0 = not detecting light |
| Tailings E00 |
30 |
_ _ _ _ |
x1xx |
DISPLAY: Slave Sensor detector #3 |
1 = detecting light
0 = not detecting light |
| Tailings E00 |
30 |
_ _ _ _ |
xx1x |
DISPLAY: Slave Sensor detector #2 |
1 = detecting light
0 = not detecting light |
| Tailings E00 |
30 |
_ _ _ _ |
xxx1 |
DISPLAY: Slave Sensor detector #1 (closest to elevator chain) |
1 = detecting light
0 = not detecting light |
| Tailings E00 |
31 |
_ _ _ _ |
1xxx |
DISPLAY: Master Sensor detector #4 (furthest from elevator chain) |
1 = detecting light
0 = not detecting light |
| Tailings E00 |
31 |
_ _ _ _ |
x1xx |
DISPLAY: Master Sensor detector #3 |
1 = detecting light
0 = not detecting light |
| Tailings E00 |
31 |
_ _ _ _ |
xx1x |
DISPLAY: Master Sensor detector #2 |
1 = detecting light
0 = not detecting light |
| Tailings E00 |
31 |
_ _ _ _ |
xxx1 |
DISPLAY: Master Sensor detector #1 (closest to elevator chain) |
1 = detecting light
0 = not detecting light |
| Tailings E00 |
50 |
_ _ _ _ |
_ _ _ 1 |
DISPLAY: Status of header engaged CAN Bus message |
1 = header engaged
0 = header disengaged |
| Tailings E00 |
51 |
_ _ _ _ |
_ _ _ 1 |
DISPLAY: Status of separator engaged CAN Bus message |
1 = separator engaged
0 = separator disengaged |
| Tailings E00 |
52 |
_ _ _ _ |
_ _ _ 1 |
DISPLAY: Status of seed size CAN Bus message |
1 = small seed
2 = medium seed
3 = large seed |
| Tailings E00 |
70 |
_ _ _ _ |
_ nnn |
DISPLAY: Tailings percentage |
Percentage of full scale display shown on Cornerpost Display Unit 2 |
| Tailings E00 |
71 |
_ _ _ _ |
_ _ _ 1 |
DISPLAY: Calibration flag |
1 = calibration in progress |
| Control Unit |
Add. |
Line 2 |
Line 3 |
Description |
Details |
| Tailings E00 |
100 |
_ _ _ _ |
_ nnn |
DISPLAY/MODIFY: Small seed scaling value |
Increase number to show more bars.
Range = 0 to 250
Default = 100 |
| Tailings E00 |
101 |
_ _ _ _ |
_ nnn |
DISPLAY/MODIFY: Medium seed scaling value |
Increase number to show more bars.
Range = 0 to 250
Default = 100 |
| Tailings E00 |
102 |
_ _ _ _ |
_ nnn |
DISPLAY/MODIFY: Large seed scaling value |
Increase number to show more bars.
Range = 0 to 250
Default = 100 |
| Tailings E00 |
120 |
_ _ _ _ |
_ n.nn |
DISPLAY: Slave sensor calibration value |
Range = 0.10 - 0.45 |
| Tailings E00 |
121 |
_ _ _ _ |
_ n.nn |
DISPLAY: Master sensor calibration value |
Range = 0.10 - 0.45 |
| Tailings E00 |
227 |
_ _ nn |
nnnn |
DISPLAY: Part number of the boot block program |
|
| Tailings E00 |
228 |
_ _ _ _ |
nnnn |
DISPLAY: Version number of the boot block program |
|
| Tailings E00 |
233 |
_ _ nn |
nnnn |
DISPLAY: Base program part number |
|
| Tailings E00 |
234 |
_ _ _ _ |
nnnn |
DISPLAY: Base program version number |
|
| Tailings E00 |
235 |
_ _ nn |
nnnn |
DISPLAY: Device part number |
|
| Tailings E00 |
236 |
_ _ _ _ |
nnnn |
DISPLAY: Device serial number |
|
| Tailings E00 |
247 |
_ _ _ _ |
_ _ nn |
DISPLAY: Machine Model Number |
14 = 9640, 9660, 9680
16 = 9540, 9560, 9580 |