Safety Rules When Replacing Halogen Bulbs

When replacing a halogen bulb, always comply with the following safety instructions:

CAUTION: Turn off the light switch and allow the bulb to cool before changing bulbs. Leave the switch off until bulb change is complete.

CAUTION: Wear eye protection when changing a halogen bulb.

CAUTION: Halogen bulbs contain halogen gas under pressure. Handling a bulb improperly could cause it to shatter into flying fragments.

CAUTION: Do NOT use any bulbs that have fallen on the ground or have scratches on their surface, as there is a risk of shattering them.

CAUTION: Make sure that the bulb is seated correctly in its holder in the light.

CAUTION: Check the light for signs of damage and make sure the seals are seated correctly.

IMPORTANT: Handle the bulb by its base. Avoid touching the glass.

IMPORTANT: Place used bulb in the new bulb's carton and dispose of properly. Keep out of reach of children.

IMPORTANT: Do not drop or scratch the bulb. Keep moisture away.

IMPORTANT: Use a clean cloth and alcohol to remove any fingerprints from the glass bulb.

OUZXMAG,00018EE -19-14OCT02-1/1