|
Uneven or bunched feeding of crop to cylinder.
|
Front of conveyor chain adjusted too high.
|
Adjust conveyor drum so that conveyor slat clears bottom with correct clearance.
|
|
|
Conveyor chain too tight and holds drum up.
|
Adjust conveyor chain to correct tension.
|
|
|
Header drive belt slipping.
|
Spring-loaded idler must be free and tight against belt.
|
|
|
Feeder house drive chain not on correct sprocket.
|
Place chain on correct sprocket.
|
|
|
Conveyor slats bowed up.
|
Straighten or replace bent slats.
|