Crop Settings

NOTE: For combines without optional "Automatic Combine Adjust" System, the crop settings are adjusted manually. To do so, refer to the table at the beginning of this group. The settings are for average harvesting conditions. Varying crop and field conditions may require slightly different settings.

Other Requirements for Wheat
  • Feeder house conveyor drive sprocket: Large (26 teeth)
  • Distance between feeder house conveyor slats and floor: 3 mm (1/8 in.)
  • Position of lower feeder house conveyor drum: Low
  • Distance between platform auger and floor: 10 to 15 mm (0.4 to 0.6 in.)
  • Straw chopper speed: Max.
  • Straw chopper cross strips or cross bars: Installed
Other Requirements for Barley
  • Feeder house conveyor drive sprocket: Large (26 teeth)
  • Distance between feeder house conveyor slats and floor: 3 mm (1/8 in.)
  • Position of lower feeder house conveyor drum: Low
  • Distance between platform auger and floor: 10 to 15 mm (0.4 to 0.6 in.)
  • De-awning plate: Engaged
  • Straw chopper speed: Max.
  • Straw chopper cross strips or cross bars: Installed
Other Requirements for Rape
  • Feeder house conveyor drive sprocket: Large (26 teeth)
  • Distance between feeder house conveyor slats and floor: 25 mm (1 in.)
  • Position of lower feeder house conveyor drum: High
  • Distance between platform auger and floor: 20 to 30 mm (0.8 to 1.2 in.)
  • Straw chopper speed: Max., counter-knives removed
  • Straw chopper cross strips or cross bars: Removed
Other Requirements for Peas
  • Feeder house conveyor drive sprocket: Small (22 teeth)

ZX08994,000019A -19-05DEC02-1/3

  • Distance between feeder house conveyor slats and floor: 3 mm (1/8 in.)
  • Position of lower feeder house conveyor drum: Low
  • Distance between platform auger and floor: 20 to 25 mm (0.8 to 1.2 in.)
  • Straw chopper speed: Max.
  • Straw chopper cross strips or cross bars: Installed
Other Requirements for Rye:
  • Feeder house conveyor drive sprocket: Large (26 teeth)
  • Distance between feeder house conveyor slats and floor: 3 mm (1/8 in.)
  • Position of lower feeder house conveyor drum: Low
  • Distance between platform auger and floor: 10 to 15 mm (0.4 to 0.6 in.)
  • Straw chopper speed: Max.
  • Straw chopper cross strips or cross bars: Installed
Other Requirements for Sunflowers
  • Feeder house conveyor drive sprocket: Small (22 teeth)
  • Distance between feeder house conveyor slats and floor: 25 mm (1 in.)
  • Position of lower feeder house conveyor drum: High
  • Distance between platform auger and floor: 30 mm (1.2 in.)
  • Concave type: Universal or corn
  • Cylinder filler plates: Installed
  • Straw chopper speed: Reduced
  • Straw chopper cross strips or cross bars: Removed
Other Requirements for Beans
  • Feeder house conveyor drive sprocket: Small (22 teeth)
  • Distance between feeder house conveyor slats and floor: 3 mm (1/8 in.)
  • Position of lower feeder house conveyor drum: Low
  • Distance between platform auger and floor: 20 to 30 mm (0.8 to 1.2 in.)
  • Straw chopper speed: Reduced
Other Requirements for Corn
  • Feeder house conveyor drive sprocket: Large or small (26 or 22 teeth)

ZX08994,000019A -19-05DEC02-2/3

    • Distance between feeder house conveyor slats and floor: 25 mm (1 in.)
    • Position of lower feeder house conveyor drum: High
    • Concave type: Universal or corn
    • Cylinder filler plates: Installed
    • Straw chopper speed: Reduced, counter-knives removed
    • Straw chopper cross strips or cross bars: Removed
    Other Requirements for Rice
    • Feeder house conveyor drive sprocket: Large (26 teeth)
    • Distance between feeder house conveyor slats and floor: 3 mm (1/8 in.)
    • Position of lower feeder house conveyor drum: Low
    • Distance between platform auger and floor: 10 to 15 mm (0.4 to 0.6 in.)
    • Concave type: Spike tooth
    Other Requirements for Grass Seeds
    • Feeder house conveyor drive sprocket: Large (26 teeth)
    • Distance between feeder house conveyor slats and floor: 3 mm (1/8 in.)
    • Position of lower feeder house conveyor drum: Low
    • Distance between platform auger and floor: 15 to 20 mm (0.8 to 1.2 in.)
    • Straw chopper speed: Max.
    • Install cleaning fan reduction speed kit

ZX08994,000019A -19-05DEC02-3/3