| [ ] |
1. Lights are working correctly. |
[ ] |
15. Brake system has been checked and is working properly. |
| [ ] |
2. The lines and hoses have been checked and are free of leaks. |
[ ] |
16. Paintwork and decals have been checked and are OK. |
| [ ] |
3. All the machine controls and safety rules etc. have been explained to the operator. |
[ ] |
17. Engine oil level is correct. |
| [ ] |
4. Engine coolant level is correct. |
[ ] |
18. Transmission oil level is correct. |
| [ ] |
5. Hydraulic system oil level is correct |
[ ] |
19. All safety shields are in place and in good condition. |
| [ ] |
6. Drive axle oil levels are correct. |
[ ] |
20. All instrument panel gauges and lights are working correctly. |
| [ ] |
7. Cab controls (heater, blower, windshield wiper) are working correctly. |
[ ] |
21. Start switch works correctly. |
| [ ] |
8. Engine shut-off device is working correctly. |
[ ] |
22. Transmission shift components are working correctly. |
| [ ] |
9. The steering is working correctly. |
[ ] |
23. The handbrake is working correctly. |
| [ ] |
10. All pivot pins and wear pads are correctly installed. |
[ ] |
24. The load indicator is working correctly. |
| [ ] |
11. All the hydraulic system controls are working correctly. |
[ ] |
25. All seat adjustment have been checked and are OK. |
| [ ] |
12. The tire pressure has been checked and is OK. |
[ ] |
26. Wheel nuts are tightened to specified torque. |
| [ ] |
13. Breathers on axles and transmission are clear. |
[ ] |
27. The transmission oil pressure has been checked and is OK. |
| [ ] |
14. The main and steering hydraulic pressure has been checked and is OK. |
[ ] |
28. All grease fittings are lubricated. |