Every 10 Operating Hours
-
Engine - oil level check
-
Hydraulic system - oil level check
-
Radiator screen - clean
-
Cooling system
-
Tires
-
Fuel tank - open water trap
-
Indicator light test
-
Metal detector test
-
Light functions
-
Lubricate according to lubricating charts (apply grease until it escapes at the lubricating point)
After the first 10 hours of operation only
Retighten steering cylinder bracket attaching screws at rear axle.
Retighten steering cylinder bracket attaching screws at wheel motors.
Retighten wheel motor yoke attaching screws at rear axle sliding sleeve.
Until the first 50 hours of operation have been completed
Retighten front wheel attaching nuts to 550 N·m (400 lb-ft).
Retighten rear wheel attaching bolts to 260 N·m (185 lb-ft).
Retighten final drive attaching screws.
Retighten 3-speed transmission attaching screws.
Retighten front axle attaching screws.
|