Cutterhead-Safety Information
To avoid serious injury do not remove or open shields until rotation warning alarm stops. Pay close attention to rotation warning alarm; it signals movement at the cutterhead area and sounds as long as motion is detected. Cutterhead has a "run-down" time and could continue to turn for several minutes after main clutch is disengaged and engine is shut-down. Alarm will not sound if engine is running and operator is seated. DO NOT allow others to access cutterhead area until engine is off and alarm has stopped sounding. To shorten "run-down" time, reduce engine speed to slow idle before disengaging main clutch. This machine has a cutterhead rotation alarm. Do not remove cutterhead doors or try to access area if alarm is sounding. |
CAUTION:
If working on machine in cutterhead area, use all safety precautions. Listen to alarm and read all DANGER decals at point of hazard.
OUZXMAG,00008CE -19-21FEB01-1/1 |