|
1.
With the ignition switch off:
-
1.1.
Whenever the cutterhead speed is not zero, the warning feature turns on the cutterhead rotation alarm, regardless of the status of the other inputs.
-
1.2.
Whenever the cutterhead speed is zero, the warning feature turns off the cutterhead rotation alarm, regardless of the status of the other inputs.
2.
With the engine running (or ignition switch in ignition position):
-
2.1.
Whenever a Powr-Savr operation is active, the warning feature turns off the cutterhead rotation alarm, regardless of the status of the other inputs.
-
2.2.
Whenever a Powr-Savr operation is not active, the cutterhead rotation alarm is controlled as follows:
-
2.2.1.
Whenever the cutterhead speed is zero, the warning feature turns off the cutterhead rotation alarm, regardless of the status of the other inputs.
-
2.2.2.
Whenever the cutterhead speed is not zero, the cutterhead rotation alarm is controlled as follows:
|
-
2.2.2.1.
Whenever the operator is in the seat, the warning feature turns off the cutterhead rotation alarm, regardless of the status of the other inputs.
-
2.2.2.2.
Whenever the operator is in the seat and goes off the seat and the multi-function lever is in forward position, the warning feature turns on the cutterhead rotation alarm after a delay of 6 seconds.
After 3 seconds the cab buzzer sounds to inform the operator that he left the seat for longer than 3 seconds.
After 5 seconds the feedrolls will be switched off.
After 6 seconds the cutterhead will be switched off.
-
2.2.2.3.
Whenever the operator is in the seat and goes off the seat and the multi-function lever is in forward position, the warning feature turns on the cutterhead rotation alarm after a delay of 3 seconds.
Whenever the warning feature turns on the cutterhead rotation alarm, it will simultaneously disable the main clutch.
The activation of the main clutch will be reenabled when the cutterhead speed is zero.
|