John Deere

OMGC00669

Issue C1

21-Inch Walk-Behind Rotary Mower

JS63C

PIN (100001-)

Introduction

Product Identification

Safety

Operating

Replacement Parts

Service Intervals

Service Intervals

Before Each Use

After Each Use

After First 5 Hours

Every 25 Hours Or Annually (whichever comes first)

Every 50 Hours

Service

Troubleshooting

Storing Machine

Assembly

Specifications

Warranty

John Deere Quality Statement

Service Record

All Manuals Close Window

Service Intervals


Service Intervals

Please use the following timetables to perform routine maintenance on your machine. Service procedures included in this manual but not on this chart are to be performed on an as needed basis.

IMPORTANT: Avoid damage! If you operate mower in extreme heat, dust or other severe conditions, service more often than shown below.


Before Each Use

· Check oil level.

After Each Use

· Clean the mower.

After First 5 Hours

· Change engine oil (break-in).

· Lubricate mower axles.

· Lubricate drive shaft hub bushings.

Every 25 Hours Or Annually (whichever comes first)

· Tighten blade bolt.

· Clean or replace air cleaner paper element.

· Clean and gap spark plug.

· Clean belt and transmission area.

· Change engine oil.

· Lubricate mower axles.

· Lubricate drive shaft hub bushings.

Every 50 Hours

· Adjust transmission cable.

· Grease caster wheel spindle.