John Deere

OMM136921

Issue H8

724D and 826D Walk-Behind Snowblowers

Serial No. (180001 - )

Introduction

Safety Signs

Controls

Operating

Replacement Parts

Service Machine Safely

Service

Troubleshooting

Storing Machine

Assembly

Specifications

Warranty

John Deere Quality Statement

Quality Doesn't End When You Invest In A Deere

Copyrightę Deere & Company

All Manuals Close Window

John Deere Quality Statement


Quality Doesn't End When You Invest In A Deere

John Deere equipment is more than just a purchase, it's an investment in quality. That quality goes beyond our equipment to your John Deere dealer's parts and service support. This support is needed to keep you a satisfied customer.

That's why John Deere has initiated a process to handle your questions or problems, should they arise. The following three steps will help guide you through the process.

Refer to your operator's manual

It has many illustrations and detailed information on the safe and proper operation of your equipment.

It gives ordering information for parts catalogs, service and technical manuals.

It gives troubleshooting procedures, and specification information.

If your questions are not answered in the operator's manual, then go to Step 2.


Contact your dealer

Your John Deere dealer has the responsibility, authority, and ability to answer questions, resolve problems, and fulfill your parts and service needs.

If the parts and service people are unable to resolve your problem, see the dealership manager or owner.

First, discuss your questions or problems with your dealer's trained parts and service staff.

If your questions or problems are not resolved by the dealer, then go to Step 3.


Call the John Deere Customer Communications Center

Your John Deere dealer is the most efficient source in addressing any concern, but if you are not able to resolve your problem after checking your operator's manual and contacting your dealer, call the Customer Communications Center.

For prompt, effective service, please have the following ready before you call:

The name of the dealer with whom you've been working.

Your equipment model number.

Number of hours on machine (if applicable).

Your 13-digit serial number which you recorded on the inside front cover of this manual.

If the problem is with an attachment, your attachment identification number.

Then call 1-800-537-8233 and our advisor will work with your dealer to investigate your concern.