Introduction
Product Identification
Safety
Operating
Replacement Parts
Service Intervals
Service Lubrication
Lubricating Front Wheel Spindles
Lubricating Mower Wheels (48C and 54C Mowers Only)
Service Engine
Service Transmission
Service Mower
Service Electrical
Service Miscellaneous
Troubleshooting
Storage
Assembly
Specifications
Warranty
John Deere Quality Statement
Service Record
Service Lubrication
Grease
The following greases are preferred:
· John Deere Multi-Purpose SD Polyurea Grease
· John Deere Multi-Purpose HD Lithium Complex Grease
· John Deere Moly High Temperature EP Grease
If not using any of the preferred greases, be sure to use a general all-purpose grease with an NLGI grade No.2 rating.
Wet or high speed conditions may require use of a special-use grease. Contact your Servicing dealer for information.
Lubricating Front Wheel Spindles
c CAUTION: Avoid injury! Do not work under a raised machine unless it is safely supported. A machine that slips and falls off a jack could cause serious injury or death.
|
1. Raise front of machine with a safe lifting device so front wheels are slightly off the ground.
2. Lubricate front spindles (A) with recommended grease.
3. Turn steering wheel back and forth to distribute grease in spindles.
4. Lower machine to the ground.
Lubricating Blade Spindles
Picture Note: 42C shown upper, 48C and 54C shown lower.
Lubricate spindles (A) with recommended grease.
Lubricating Mower Wheels (48C and 54C Mowers Only)
Lubricate mower wheel grease fittings (A).