John Deere

OMM147677

Issue A2

Spin-Steer Lawn Tractor

SST15

PIN (040001-)

Introduction

Product Identification

Safety

Operating

Replacement Parts

Service Intervals

Service Engine

Service Transmission

Service Steering

Service Mower

Service Electrical

Service Miscellaneous

Troubleshooting

Storage

Assembly

Specifications

Engine

Drivetrain

Travel Speeds at Full Engine RPM

Electrical System

Battery

Tires

Steering and Brakes

Capacities

Dimensions

Net Weight (With Mower Deck and Fuel)

42 All Purpose Mower

Recommended Lubricants

Warranty

John Deere Quality Statement

Service Record

All Manuals Close Window

Specifications


Engine

Model SST15

Make Kohler

Engine Model Number CV15S-41611

Horsepower 11.2 kW (15 hp)

Cylinders One

Cycle Four

Cooling Type Air

Oil Filter Replaceable Full Flow Filter

Air Cleaner Paper Element with Foam Precleaner

Spark Plug Gap 1 mm (0.040 in.)

Spark Plug Torque 40 N·m (30 lb-ft)

Drivetrain

Transaxle Kanzaki

Number of Speeds Hydrostatic, Variable Speed

Travel Speeds at Full Engine RPM

Forward 0-9 km/h (0-5.6 mph)

Reverse 0-5 km/h (0-3.1 mph)

Electrical System

Charging System Flywheel Alternator

Ignition Electronic

Starter Inertia Drive

Battery

Voltage 12 volt

CCA 160 amp

Tires

Front 13 x 5.0 - 6

Rear 20 x 10 - 8

Inflation Front (Maximum) 138 kPa (20 psi)

Inflation Rear (Maximum) 70 kPa (10 psi)

Steering and Brakes

Steering Power

Turning Radius Zero

Brakes Internal Wet Disc

Capacities

Fuel Tank 9.5 L (2.5 gal)

SST15

Engine Oil (With Filter) 1.8 L (1.9 qt)

Engine Oil (Without Filter) 1.4 L (1.5 qt)

Dimensions

Wheel Base 1251 mm (49.25 in.)

Overall Height 1041 mm (41 in.)

Overall Length 1905 mm (75 in.)

Overall Width (With 42 All Purpose Mower Deck) 1334 mm (52.5 in.)

Net Weight (With Mower Deck and Fuel)

SST15 With 42 All Purpose Mower Deck 279 kg (615 lb)

42 All Purpose Mower

Mower Type Mulch, Bag or Side Discharge

Cutting Blades 2

Mower Weight 37 kg (82 lb)

Blade Bolt Torque 75 N·m (55 lb-ft)

Cutting Width 106.7 cm (42 in.)

Cutting Height (approximate) 25 to 102 mm (1 to 4-in.)

Height Adjustment 13 position, 6.35 mm (1/4 in.) increments

Recommended Lubricants

Engine Oil TURF-GARD® OR PLUS-4®

(Specifications and design subject to change without notice.)