Introduction
Product Identification
Safety
Operating
Replacement Parts
Service Intervals
Service Lubrication
Lubricating Mower Spindles (38-Inch and 42C Decks)
Lubricating Mower Spindles (Freedom42 Deck)
Lubricating Front Wheel Spindles
Lubricating Lift Pedal Assembly
Service Engine
Service Transmission
Service Mower
Service Electrical
Service Miscellaneous
Troubleshooting
Storage
Assembly
Specifications
Warranty
John Deere Quality Statement
Service Record
Service Lubrication
Grease
The following greases are preferred:
· John Deere Multi-Purpose SD Polyurea Grease
· John Deere Multi-Purpose HD Lithium Complex Grease
· John Deere Moly High Temperature EP Grease
If not using any of the preferred greases, be sure to use a general all-purpose grease with an NLGI grade No.2 rating.
Wet or high speed conditions may require use of a special-use grease. Contact your Servicing dealer for information.
Lubricating Mower Spindles (38-Inch and 42C Decks)
IMPORTANT: Avoid damage! Do not grease 38-Inch or 42C mower deck spindles. Bearings are sealed. Attempting to grease the spindles may damage the seals and shorten the bearing life. |
Lubricating Mower Spindles (Freedom42 Deck)
Picture Note: Mower removed for photo clarity.
· Lubricate mower spindle grease fittings (A) with two pumps of grease at specified interval.
Lubricating Front Wheel Spindles
1. Lubricate grease fitting (A) on each spindle with one or two shots of grease.
2. Turn wheels to distribute grease on spindles.
Lubricating Lift Pedal Assembly
Picture Note: Location of grease fitting
Picture Note: Close-up of grease fitting
1. Lubricate grease fitting (A) for lift pedal with enough grease to flush out dirt.