OMM134595

Issue J7

Compact Utility Tractor with Gear Transmission

Model 4100 PIN (010001 - )

INTRODUCTION

SAFETY SIGNS

CONTROLS

OPERATING MACHINE

REPLACEMENT PARTS

SERVICE MACHINE SAFELY

SERVICE INTERVAL CHART

Servicing Your Machine

Before Each Use

After Each Use

As Needed

Break-in - After First 50 Hours

Every 10 Hours or Daily

Every 50 Hours

Every 100 Hours

Every 200 Hours

Every 500 Hours

Every 2 Years

SERVICE ENGINE

SERVICE TRANSMISSION

SERVICE ELECTRICAL

SERVICE MISCELLANEOUS

TROUBLESHOOTING

STORING MACHINE

ASSEMBLY

SPECIFICATIONS

WARRANTY

JOHN DEERE SERVICE LITERATURE

QUALITY DOESN'T END WHEN YOU INVEST IN A DEERE

Copyright© Deere & Company

SERVICE INTERVAL CHART

Servicing Your Machine

Please use the following timetables to perform routine maintenance on your machine.

Before Each Use

· Check fuel tank, fill if necessary.

· Check engine oil level.

· Test safety systems.

After Each Use

· Clean debris from tractor.

· Clean debris from engine, especially cooling air screens.

· Check for loose, missing, or damaged parts.

As Needed

· Adjust alternator belt tension.

· Check radiator hose clamps.

· Bleed fuel system.

· Check fuses.

· Clean or replace battery.

· Change light bulbs.

· Lubricate seat side rails,

· Adjust steering wheel free play.

· Adjust center pin end play.

· Check tire pressure.

Break-in - After First 50 Hours

· Change engine oil and filter.

· Check alternator belt tension.

· Check radiator hose clamps.

· Check air filter hose clamps.

· Check wheel bolt torque.

Every 10 Hours or Daily

· Check engine oil level.

· Check air filter rubber dust unloading valve.

· Check air filter air restriction indicator.

· Check radiator coolant level.

· Check fuel filter sediment bowl.

· Check and clean cooling air screens.

· Check safety interlock system.

· Check gear transmission oil level.

· Lubricate tractor grease fittings.

· Lubricate mower deck lift linkage.

· Lubricate selective control valve (SCV) linkage.

Every 50 Hours

· Check MFWD oil level.

· Lubricate tractor grease fittings.

· Check wheel bolt torque.

· Check tire pressure.

· Check battery electrolyte

· Lubricate mower deck lift linkage.

· Lubricate selective control valve (SCV) linkage.

Every 100 Hours

· Change engine oil and filter.

Every 200 Hours

· Clean fuel filter sediment bowl.

· Check alternator belt tension.

· Check and clean radiator cooling fins.

· Lubricate 3-point hitch.

Every 500 Hours

· Check primary air filter.

· Check air filter hose clamps.

· Replace fuel filter.

· Check engine speeds.

· Change MFWD oil.

· Change gear transmission oil.

· Inspect fuel injectors. (See your John Deere dealer.)

· Adjust engine valve clearance. (See your John Deere dealer.)

Every 2 Years

· Change radiator coolant.