Service Lubrication


IMPORTANT: Avoid damage! Use recommended John Deere greases to avoid component failure and premature wear. The recommended John Deere greases are effective within an average air temperature range of -29 to 135 degrees C (-20 to 275 degrees F). If operating outside that temperature range, contact your Servicing dealer for a special-use grease.

· John Deere Multi-Purpose SD Polyurea Grease

· John Deere Multi-Purpose HD Lithium Complex Grease

· John Deere Moly High Temperature EP Grease

If not using any of the preferred greases, be sure to use a general all-purpose grease with an NLGI grade No.2 rating.

Wet or high speed conditions may require use of a special-use grease. Contact your Servicing dealer for information.

M96432

1. Lubricate fittings (A) on spindles, one on each side of tractor, with one or two shots of general all-purpose grease.

2. Turn wheels to distribute grease on spindles.

M97150

Lubricate front axle center pivot (A) with one or two shots of general all-purpose grease.

M97140

Lubricate four rear steering pivots (A), two on each side of tractor, with one or two shots of general all-purpose grease.