Introduction
Product Identification
Safety
Operating
Replacement Parts
Service Intervals
Service Lubrication
Lubricating Front Wheel Spindles
Lubricating Front Axle Pivot and Drag Link
Lubricating Front Wheel Bearings (On 2046 Model)
Service Engine
Service Steering and Brakes
Service Mower
Service Electrical
Service Miscellaneous
Troubleshooting
Storage
Assembly
Specifications
Warranty
John Deere Quality Statement
Service Record
Service Lubrication
Grease
The following greases are preferred:
· John Deere Multi-Purpose SD Polyurea Grease
· John Deere Multi-Purpose HD Lithium Complex Grease
· John Deere Moly High Temperature EP Grease
If not using any of the preferred greases, be sure to use a general all-purpose grease with an NLGI grade No.2 rating.
Wet or high speed conditions may require use of a special-use grease. Contact your Servicing dealer for information.
Lubricating Front Wheel Spindles
1. Lubricate grease fittings (A) on spindles with one or two shots of grease.
2. Turn wheels to distribute grease on spindles.
Lubricating Front Axle Pivot and Drag Link
1. Lubricate front axle center pivot (A) and drag link (B) with one or two shots of grease.
2. Pivot axle up and down to distribute grease.
Lubricating Front Wheel Bearings (On 2046 Model)
1. Lubricate front wheel bearings (A) with one or two shots of grease.