Compact Utility Tractor with Gear Transmission
Introduction
Product Identification
Safety
Operating
Replacement Parts
Service Intervals
Service Lubrication
Service Engine
Service Transmission
Service Electrical
Service Miscellaneous
Troubleshooting
Storage
Assembly
Check Tractor For Proper Ballast
Specifications
Warranty
John Deere Quality Statement
Service Record
Assembly
Delivery Instructions
Prior to delivery, do the following checks, clean tractor and review this manual with the owner/operator. Make sure owner/operator can safely operate every function of this machine.
Check Fluid Levels
IMPORTANT: Avoid damage! Check all fluid levels and fill as needed before attempting to start tractor. Tractor should be parked on level surface, all attachments lowered, and engine off. |
· Check radiator coolant level.
· Check transmission oil level.
· Check front axle oil level (MFWD only).
Check Battery
NOTE: For additional battery information see the Service Electrical section of this manual.
If starting motor turns over quickly, then battery is charged. If engine will not turn over and headlights are dim or will not turn on, charge the battery.
Charge the battery for a minimum of 30 minutes at 5 - 10 amps. If your battery charger has a "Deep Cycle" or "Maintenance Free" setting, use this setting to charge the battery.
Check Safety Interlock System
Perform a complete check of the safety interlock system. Do not put machine in service if any safety feature is inoperable or disconnected.
Check All Lights
Make sure the headlights, taillights, warning lights, and any optional work lights are functional.
Check Wheel Bolt Torque
Check all wheel bolts for proper torque.
Check Tractor For Proper Ballast
If tractor is being delivered with an attachment, make sure attachment is properly installed. See attachment Operator's Manual.
If tractor is being delivered with an attachment, make sure tractor has the proper ballast.