Service Lubrication


IMPORTANT: Avoid damage! Use of incorrect greases can result in premature wear of parts and component failures. Recommended John Deere greases are effective within an average air temperature range of -29 to 135°C (-20 to 275°F). If operating outside this temperature range, see your John Deere dealer for extreme temperature greases.

The following John Deere grease is PREFERRED:

· NON-CLAY HIGH-TEMPERATURE EP GREASE®-JDM J13E4, NLGI Grade 2

Other greases may be used if above John Deere grease is not available, provided they meet the following compatibility specifications only:

· John Deere Standard JDM J13E4, NLGI Grade 2

NOTE: Top view of tractor shown in service lubrication diagrams.

· Extremely Wet and Muddy Conditions - Lubricate tractor grease fittings every 10 hours of operation or on a daily basis

· All Other Conditions - Lubricate tractor grease fittings every 50 hours of operation

M61684

A - Axle Pivot

B - Steering Spindles

C - Tie Rod Ends

D - Steering Cylinder Ball Joints

E - Clutch Pedal Pivot

F - Brake Shaft Pivot

G - Right Hand Brake Pedal Pivot

M61685

A - Axle Pivot

B - Tie Rod Ends

C - Steering Cylinder Ball Joints

D - Clutch Pedal Pivot

E - Brake Shaft Pivot

F - Right Hand Brake Pedal Pivot