OMLVU10907

Issue A0

Compact Utility Tractor with Gear Transmission

990

PIN (190001-)

Introduction

Product Identification

Safety

Operating

Replacement Parts

Service Intervals

Servicing Your Machine

Before Each Use

After Each Use

As Needed

Break-in - After First 10 and 30 Hours

Break-in - After First 50 Hours

Every 10 Hours

Every 50 Hours

Every 200 Hours

Every 500 Hours

Every 2 Years

Service Lubrication

Service Engine

Service Transmission

Service Electrical

Service Miscellaneous

Troubleshooting

Storage

Assembly

Specifications

Warranty

John Deere Quality Statement

Service Record

Service Intervals

Servicing Your Machine

Please use the following intervals to perform routine maintenance on your machine.

Before Each Use

· Check fuel tank, fill if necessary.

· Check engine oil level.

· Test safety systems.

After Each Use

· Clean debris from tractor.

· Clean debris from engine, grille screens, and radiator cooling screen.

· Check for loose, missing, or damaged parts.

As Needed

· Adjust alternator belt tension.

· Check air cleaner filters.

· Check fuel sediment bowl.

· Adjust front wheel toe-in.

· Adjust brakes.

· Adjust throttle.

· Replace light bulbs.

· Check radiator hose clamps.

· Check fuses.

· Clean or replace battery.

· Adjust clutch.

· Check tire pressure.

Break-in - After First 10 and 30 Hours

· Check wheel bolt torque.

Break-in - After First 50 Hours

· Change engine oil and filter.

· Check alternator belt tension.

· Check hose clamps.

· Check wheel bolt torque.

Every 10 Hours

· Check engine oil level.

· Check rear wheel bolts.

· Check gear transmission oil level.

· Check air filter rubber dust unloading valve.

· Check optional air restriction indicator.

· Check radiator coolant level.

· Check fuel filter sediment bowl.

· Check and clean grille and radiator screen.

· Check safety interlock system.

· Lubricate tractor grease fittings (only when operating in extremely wet or muddy conditions).

Every 50 Hours

· Check optional MFWD oil level.

· Lubricate tractor grease fittings.

· Check wheel bolt torque.

· Inspect tires and check air pressure.

· Check battery electrolyte level.

· Check for loose, missing, or damaged parts.

Every 200 Hours

· Change engine oil and filter.

· Check fan belt tension.

· Clean fuel filter sediment bowl.

· Inspect alternator belt and check tension.

· Clean radiator cooling fins.

Every 500 Hours

· Replace primary air filter.

· Check secondary air filter. (Replace after every third primary filter is replaced if air restriction indicator is not installed on your machine.)

· Check air cleaner hose clamps.

· Replace fuel filter.

· Check engine speeds.

· Change optional MFWD oil.

· Change gear transmission oil and filter. Clean transmission suction screen and vent tube.

· Inspect fuel injectors. (See your John Deere dealer.)

· Adjust engine valve clearance. (See your John Deere dealer.)

· Check front axle pivot pin. (See your John Deere dealer.)

· Pack front wheel bearings. (See your John Deere dealer.)

Every 2 Years

· Flush cooling system.

· Change radiator coolant.

· Replace thermostat. (See your John Deere dealer.)