Introduction
Safety Signs
Preparing Vehicle
Installing
Removing
Operating
Service Safely
Service
Troubleshooting
Storing Machine
Assembly
Specifications
John Deere Service Literature
John Deere Quality Statement
Copyright© Deere & Company
Storing Machine
Storing Snowblower
c CAUTION: Avoid injury! DO NOT work under a raised snowblower unless it is supported correctly.
|
1. Remove snowblower. (See REMOVING SNOWBLOWER in the Removing Snowblower section.)
2. Clean the snowblower with water pressure from a hose.
3. Repair or replace worn, bent, or damaged parts.
4. Apply paint to areas that need it to prevent rust.
5. Lubricate pivot points with engine oil.
6. Lubricate three grease points.
7. Put a waterproof cover over snowblower, if you store it outdoors.