Introduction
Product Identification
Safety
Operating
Replacement Parts
Service Interval Chart
Break In (After First 50 Hours of Operation)
100 Hours or Annually (whichever comes first)
200 Hours or Annually (whichever comes first)
250 Hours or Annually (whichever comes first)
500 Hours or Every Two Years (whichever comes first)
Service Engine
Service Transmission
Service Lubrication
Service Electrical
Service Miscellaneous
Troubleshooting
Storing Machine
Assembly
Specifications
Warranty
John Deere Quality Statement
Service Record
Copyright© Deere & Company
Service Interval Chart
After First 5 Hours
Break In (After First 50 Hours of Operation)
· Check/tighten air & cooling hose clamps.
· Change transaxle oil and filter.
· Change engine oil and filter.
50 Hours
· Clean battery and check electrolyte level.
· Lubricate steering spindles, pivots and cylinder.
100 Hours
· Check fuel filter, drain water as necessary.
100 Hours or Annually (whichever comes first)
200 Hours
· Change transaxle oil and filter.
· Clean radiator fins and screen.
· Check/tighten steering linkage hardware.
200 Hours or Annually (whichever comes first)
· Change engine oil and filter.
250 Hours or Annually (whichever comes first)
500 Hours
· Check/tighten air & cooling hose clamps.
NOTE: See your John Deere dealer for the following services.
· Adjust engine valve clearance.