OMM153409
Issue C8
Mechanical Tiller
30-Inch PIN(010001-)
OPERATOR’S MANUAL
North American Version
Litho in U.S.A.
- Using Your Operator’s Manual
- Product Compatibility
- Record Identification Numbers
- Understanding The Machine Safety Labels
- WARNING
- CAUTION
- CAUTION
- Read Safety in Machine Operator’s Manual
- Operating Safely
- Parking Safely
- Checking Area to be Tilled
- Practice Safe Maintenance
- Avoid Injury from Moving Parts
- Avoid High Pressure Fluids
- Identify Parts - Bag of Parts
- Install Idler Sheave
- Machine Setup
- Remove Fender Deck
- Install Bolt Stop
- Install Center Mounting Pin
- Install Rear Frame Mounting Hardware
- Prepare Foot Lift Assembly
- Prepare Hydraulic Lift Assembly
- Ballasting Requirements
- Lower Tractor Lift System
- Put Wheels in Down Position
- Put Tiller in Transport Position
- Install Spring
- Install Tiller on Rear Tractor Frame
- Fasten Clips and Install Belt
- Lock Wheels in Up Position
- Install Lift Rod
- Adjust Tiller Lift Height
- Put Tiller in Transport Position
- Put Wheels in Down Position
- Remove Lift Arm and Lift Rod
- Storing Attachment
- Tilling Tips
- Before Tilling
- Raising and Lowering Tiller
- Adjusting Lift Assist Spring (Models with Foot Lift)
- Using Depth Control Knob
- Adjusting Tilling Depth
- Operating Tiller
- Inspect, Unplug, or Park Attachment Safely
- Transporting Tiller
- Grease
- Lubricating Drive Sheave Bearing
- Lubricating Rear Jackshaft
- Lubricating the Chain
- Service Intervals
- Checking Belt Tension
- Cleaning Under Belt Shield
- Removing and Installing Primary Drive Belt
- Removing and Installing Secondary Belt
- Replacing Tines
- Using Troubleshooting Chart
- Tiller
- Tiller Specifications
- Service Literature
- Parts
- John Deere Quality Continues with Quality Service