Introduction
Product Identification
Safety
Operating
Replacement Parts
Service Intervals
Service Lubrication
Lubricate Boom Cylinders, Bucket Cylinders, and QUIK-TATCH
Service Engine
Service Chain Case
Service Hydraulics
Service Steering & Brakes
Service Electrical
Service Miscellaneous
Troubleshooting
Storage
Specifications
Warranty
John Deere Quality Statement
Service Record
Service Lubrication
Grease
Use grease based on the expected air temperature range during the service interval.
The following greases are preferred:
· John Deere MOLY HIGH TEMPERATURE EP GREASE
· John Deere HIGH TEMPERATURE EP GREASE (Non-Clay)
Other greases may be used if they meet one of the following:
· SAE Multipurpose EP Grease with a maximum of 5% molybdenum disulfide
Greases meeting Military Specification MIL-G-10924F may be used as arctic grease.
Lubricate Boom Cylinders, Bucket Cylinders, and QUIK-TATCH
Lubricate pivot points (A), cylinders (B), and QUIK-TATCH linkage/pivot points (C) on each side of boom every 50 hours with one or two shots of John Deere grease.