Introduction
Product Identification
Safety
Preparing Vehicle
Installing
Removing
Operating
Replacement Parts
Service
Troubleshooting
Storage
Assembly
Specifications
Quality Statement
CopyrightŠ Deere & Company
Storage
Storing Snowthrower
c CAUTION: Avoid injury! DO NOT work under a raised snowthrower unless it is supported correctly.
|
1. Remove snowthrower from tractor.
2. Clean the snowthrower with water under pressure.
3. Check belt. If necessary, get new belt. Do not install new belt until you take snowthrower out of storage.
4. If possible, store snowthrower indoors on hard, level surface.
If you store snowthrower outside:
ˇ Put blocks or a board under snowthrower.
ˇ Cover snowthrower with a waterproof cover.
5. Inspect snowthrower. Repair or replace badly worn or damaged parts.