673 Loader
Copyright 2010 © Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Dealer’s Record
Predelivery
Delivery
After-Sale
Record Product Identification Number
Keep Proof of Ownership
Keep Machines Secure
Section : 05-Safety
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Protect People and Animals
Avoid Injury or Death from Rollover Accidents
Avoid Power Lines
Dig Safely
Detach Loader Safely
Avoid Injury or Death from Falling Round Bales
Keep Riders Off Machine
Operate Bucket/Attachment Safely
Carry Materials Safely
Safe Loader Operation on Slopes
Driving on Public Roads
Service Loader Safely
Check Hoses for Damage
Avoid High-Pressure Fluids
Store Attachments Safely
Replace Safety Signs
Safety Sign Locations
Section : 10-Prepare the Tractor
Approved Tractors
Removing Front Weights and Weight Support
Front Tread Settings (2-Wheel Drive Tractors)
Front Tire Tread Setting and Fender Compatibility (MFWD Tractor)
Rear Tread Settings
Front Tire Load Index and Rear Ballast Requirements
Attaching Ballast Box to Tractor Hitch
Adjust E-ICV Functions (6X20 and 7X20 Premium Tractors)
Adjust E-ICV Functions (6X30 and 7X30 Premium Tractors)
Section : 15-Controls
Operating Loader with Multi-Function Control Lever
Section : 20-Detach Loader
Detach Loader
Section : 25-Attach Loader
Attach Loader
Section : 30-Transport
Carrying Loads
Keep Riders Off Machine
Driving on Public Roads
Section : 35-Operate Loader
Raising and Lowering Loader
Removing Material from a Pile
Dumping Bucket
Digging
Leveling Bucket
Leveling and Scraping Forward
Leveling in Reverse
Detach the Bucket or Attachment
Attach the Bucket or Attachment
Attachments Available
Section : 40-Lubrication and Maintenance
Lubricate and Service Loader Safely
Perform Lubrication and Maintenance
Observe Lubrication Symbols
Grease
Alternative and Synthetic Lubricants
First 10 Hours
Every 10 Hours
Every 50 Hours
Section : 45-Service
Servicing Loader and/or Tractor Safely (Loader Attached)
Keep Service Area Clean
Avoid High-Pressure Fluids
O-Ring Installation
Tightening Procedure for Fittings
Replacing Hydraulic Hoses, Couplers, Tubing, or Connectors
Access Front of Tractor
Identifying Hose Connections—Loader to Mid-Mount Couplers and Valve (All EXCEPT 5000, 5010, 5020, 5025, 5M, 5E Limited, 7200, 7210, 7400 and 7410 Tractors)
Identifying Hose Connections—Loader to Valves at Rear of Tractor (7200, 7210, 7400 and 7410 Tractors)1
Adjusting QUIK-CHANGE™ Latch Plates (600-Style Carrier)
Metric Bolt and Screw Torque Values
Unified Inch Bolt and Screw Torque Values
Section : 50-Assembly
Perform Predelivery Service Safely
Installation Instructions Available Online to John Deere Dealers
Recommended Set Up/Assembly Sequence
Prepare the Tractor
Prepare the Loader
Position Loader on Mounting Frames
Install Bucket/Attachment
Final Inspection and Adjustments
Install Optional Equipment/Attachments
Section : IBC-John Deere Service Keeps You On The Job
John Deere Is At Your Service