FIRST 5 HOURS
|
Check drive belt tension.
|
EVERY 10 HOURS
|
Lubricate greens tender conditioner (GTC) or rotary brush.
|
Wash air precleaner if used in very dusty conditions. (Thereafter every 25 hours.)
|
Lubricate reel.
|
Lubricate input drives to ground drive chain.
|
Lubricate input drives to reel drive chain.
|
AFTER THE FIRST 20 HOURS
|
Change engine oil.
|
Tighten nuts and screws.
|
Clean sediment bowl.
|
EVERY 25 HOURS
|
Lubricate front roller.
|
Lubricate rear roller.
|
Clean air cleaner foam element.
|
Check gear case oil level.
|
EVERY 50 HOURS
|
Clean fuel sediment bowl.
|
Check air cleaner paper element.
|
Lubricate knife shoe bolts.
|
Lubricate drive control grease zerks.
|
Lubricate adjusting knobs.
|
Change engine oil.
|
Check transport wheels (if equipped).
|
EVERY 100 HOURS
|
Clean spark plug and adjust gap.
|
Clean cylinder and cylinder head cooling fins.
|
EVERY 300 HOURS
|
Remove carbon from cylinder, cylinder head, and piston.
(See your John Deere Dealer.)
|
Check valves. Reface or replace as necessary.
(See your John Deere Dealer.)
|
Check and adjust valve clearance.
(See your John Deere Dealer.)
|
Change air cleaner paper element. (More often in dusty conditions.)
|
YEARLY OR EVERY 500 HOURS
|
Drain and refill gear case.
|
Check and Adjust drive chain.
|
Check spark plug and drive belts.
|
c CAUTION: Avoid injury! Do not clean, lubricate, or adjust machine while it is running.
