Service Intervals

OMTCU14008

Issue L0

Z-Trak ® FRONT MOWER

F680

PIN (020001-)

Introduction

Product Identification

Safety

Operating

Replacement Parts

Service Intervals

Servicing Your Machine

Before Each Use

Break-In - After First 5 Hours

Break-In - After First 50 Hours

Every 100 Hours

Every 500 Hours

Every 1000 Hours

Service Lubrication

Service Engine

Service Transmission

Service Steering & Brakes

Service Electrical

Service Miscellaneous

Troubleshooting

Storage

Assembly

Specifications

Warranty

John Deere Quality Statement

Service Record

Copyright© Deere & Company

Service Intervals

Servicing Your Machine


IMPORTANT: Avoid damage! Operating in extreme conditions may require more frequent service intervals: · Engine components may become dirty or plugged when operating in extreme heat, dust or other severe conditions. · Engine oil and spark plugs may lose efficiency if vehicle is operated constantly at slow or low engine speeds or with frequent short trips.

Please use the following timetables to perform routine maintenance on your machine.

Before Each Use

· Make sure all safety guards and shields are attached.

· Test safety interlock systems.

· Check engine oil level.

· Check hydraulic oil level.

· Check for hydraulic oil leaks.

· Check fuel level.

· Check pump drive belt for damage or cracking.

· Check tires for damage, cracking and correct tire pressure.

· Check operation of park brake.

· Check to make sure engine oil cooler fins are clean.

After Each Use

· Clean debris from air intake screen and engine oil cooler.

· Check for loose, missing, or damaged parts.

As Needed

· Check and adjust transmission neutral.

· Replace pump drive belt.

· Check and align control levers.

· Adjust control lever neutral start switches.

· Adjust park brake.

· Adjust tracking.

· Check and adjust PTO clutch.

Break-In - After First 5 Hours

· Change engine oil and filter.

· Check pump drive belt.

· Check wheel bolt tightness.

Every 25 Hours

· Lubricate rear wheel(s) and spindles.

· Lubricate pump drive belt tensioner.

· Check tire pressure.

Break-In - After First 50 Hours

· Change engine oil and filter.

· Change hydraulic oil and filter.

Every 50 Hours

· Check air cleaner elements. Clean if necessary.

· Check wheel bolt tightness.

Every 100 Hours

· Change engine oil and filter.

· Check pump drive belt.

· Clean engine cooling fins.

Every 500 Hours

· Change hydraulic oil and filter.

Every 1000 Hours

· Replace fuel filter.

· Replace spark plugs.

Yearly

· Change air cleaner element.

· Change engine oil and filter at least once per season.