BEFORE EACH USE

Check fuel and engine oil level.

Clean cooling fan screen.

BREAK-IN

Change engine oil and filter after the first 25 hours of operation.

Check belt condition after first 10 hours.

Tighten wheel lug nuts after first 10 hours, 20 hours, and every 200 hours thereafter.

25 HOURS

Check tire pressure using low pressure gauge.

Grease rear axle only.

Check and adjust steering chain.

50 HOURS

Clean drive pulley.

Check wear pads on driven clutch.

Check belt condition.

Check battery electrolyte level.

Clean rubber dust valve on air cleaner housing.

100 HOURS

Change engine oil and filter.

Check transaxle fluid.

Check spark plug.

YEARLY OR AS REQUIRED

Replace internal air filter.

Clean battery.

Clean engine cooling fins.

Check condition of fuel lines.

Change transaxle oil.