3032E, and 3038E Compact Utility Tractors
Operator's Manual (NA, January 2014)
Copyright 2023 © Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Required Emission-Related Information
Section 01 - Introduction
Thank You for Purchasing a John Deere Product
Using Your Operator’s Manual
Special Messages
Attachments for Your Machine
Section 02 - Product Identification
Record Identification Numbers
Section 03 - Safety Labels
Replace Safety Signs
Safety Label Location
Safety Labels
Section 04 - Safety
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Prepare for Emergencies
Wear Protective Clothing
Protect Against Noise
Handle Fuel Safely—Avoid Fires
Handle Starting Fluid Safely
Fire Prevention
In Case of Fire
Avoid Static Electricity Risk When Refueling
Keep ROPS Installed Properly
Use Foldable ROPS and Seat Belt Properly
Stay Clear of Rotating Drivelines
Use Steps and Handholds Correctly
Read Operator’s Manuals for ISOBUS Controllers
Use Seat Belt Properly
Operating the Tractor Safely
Avoid Backover Accidents
Limited Use in Forestry Operation
Operating the Loader Tractor Safely
Keep Riders Off Machine
Instructional Seat
Use Safety Lights and Devices
Use a Safety Chain
Transport Towed Equipment at Safe Speeds
Use Caution on Slopes, Uneven Terrain, and Rough Ground
Freeing a Mired Machine
Avoid Contact with Agricultural Chemicals
Handle Agricultural Chemicals Safely
Handling Batteries Safely
Avoid Heating Near Pressurized Fluid Lines
Remove Paint Before Welding or Heating
Handle Electronic Components and Brackets Safely
Practice Safe Maintenance
Avoid Hot Exhaust
Clean Exhaust Filter Safely
Work In Ventilated Area
Support Machine Properly
Prevent Machine Runaway
Park Machine Safely
Transport Tractor Safely
Service Cooling System Safely
Service Accumulator Systems Safely
Service Tires Safely
Service Front-Wheel Drive Tractor Safely
Tightening Wheel Retaining Bolts/Nuts
Avoid High-Pressure Fluids
Do Not Open High-Pressure Fuel System
Store Attachments Safely
Decommissioning — Proper Recycling and Disposal of Fluids
and Components
Section 05 - Operating Controls
Operator Station Controls
Section 06 - Operating
Daily Operating Checklist
Avoid Damage to Plastic and Painted Surfaces
Adjusting Seat
Using Seat Belt
Using Light Switch
Using Key Switch
Using Instrument Panel
Use Turn Signal Switch
Using Cruise Control (If Equipped)
Test Safety Systems
Test the Neutral Start Switch
Test Rear PTO Switch
Test the Seat Switch
Using Brake/Differential Lock Pedal
Using Park Brake
Using Throttle
Using Fuel Gauge
Using Fuel Shut-Off Valve
Starting the Engine
Stop Machine
Operating Transmission
Driving Machine
Using Differential Lock (Traction Assist)
Using Mechanical Front Wheel Drive (MFWD)
Use the PTO Safely
Using Rear Power-Take-Off (PTO)
Using Drawbar Hitch (if equipped)
Using 3-Point Hitch
Use Optional iMatch Quick-Attach Hitch System
Use Attachments
Ballasting Machine
Transport Machine on Trailer
Transport Machine
Push or Tow Machine
Exhaust Filter System Overview
Automatic (AUTO) Exhaust Filter Cleaning
Disabled Exhaust Filter Cleaning
Parked Exhaust Filter Cleaning
Service Exhaust Filter Cleaning
Section 07 - Replacement Parts
Service Literature
Parts
Section 08 - Fuel, Lubricants, and Coolant
Diesel Fuel
Handling and Storing Diesel Fuel
Testing Diesel Fuel
Minimizing the Effect of Cold Weather on Diesel Engines
Alternative and Synthetic Lubricants
Engine Oil
Diesel Engine Coolant
Operating in Warm Temperature Climates
Additional Information About Diesel Engine Coolants and John
Deere COOL-GARD™ II Coolant Extender
Testing Diesel Engine Coolant
Section 09 - Service Intervals
Service Machine
As Needed
After First 10 Hours
Every 10 Hours or Daily
After First 50 Hours
Every 50 Hours
Every 200 Hours or Annually
Every 400 Hours
Every 400 Hours or Annually
Every 600 Hours
Yearly
Every 1000 Hours
Every Year or 1000 Hours
Every Two Years or 2000 Hours
Every Six Years or 6000 Hours
Section 10 - Service Lubrication
Grease
Lubricating 3-Point Hitch
Section 11 - Service Engine
Engine Warranty Maintenance Statement
Avoid Fumes
Checking Engine Oil Level
Changing Engine Oil and Filter
Clean Dust Unloading Valve
Servicing Air Filter Elements
Checking Air Filter Hose
Service Cooling System Safely
Servicing Cooling System
Checking Radiator Hoses and Clamps
Cleaning Radiator Cooling Fins
Servicing the Alternator Belt
Checking and Cleaning Fuel Filter Sediment Bowl and Replacing
Filter
Fuel Injection Pump
Fuel Injection Nozzles
Clean Front Grille Screens
Section 12 - Service Transmission
Transmission and Hydraulic Oil
Checking Front Axle Oil Level
Changing Front Axle Oil
Adjusting Front Axle Thrust Bolt Torque
Checking Transmission Oil Level
Changing Transmission Oil and Hydraulic Suction Oil Filter
Section 13 - Service Electrical
Service Electrical
Service the Battery Safely
Check Battery Electrolyte Level
Removing and Installing Battery
Clean Battery and Terminals
Use Booster Battery
Replacing Headlight Bulb
Replacing Tail/Turn Light Bulb
Replacing Warning Light Bulb
Replacing Relays and Fuses
Section 14 - Service Miscellaneous
Filling Fuel Tank
Raising and Lowering Hood
Removing and Installing Side Panels
Checking Wheel Bolts and Hardware
Remove and Install Wheels
Check Tire Pressure
Select Front Tire Rolling Direction
Change Wheel Spacing and Tread Width
Checking and Adjusting Toe-In
Lifting Points for Jacking up the Tractor
Clean Plastic Surfaces
Clean and Repair Metal Surfaces
Section 15 - Troubleshooting
Use Troubleshooting Chart
Engine
Electrical System
Machine
Brakes
Steering
Section 16 - Storage
Store Safety
Prepare Machine for Storage
Prepare Fuel and Engine For Storage
Remove Machine from Storage
Section 17 - Specifications
Engine
Drivetrain
Electrical System
Front Wheels and Tires
Rear Wheels and Tires
Front Tire Inflation Pressures (Maximum)
Rear Tire Inflation Pressures (Maximum)
Tire Loads
Fluid Capacities
Ground Speeds
Dimensions
Tread Width
Height From Ground
Ground Clearance
Turning Radius
Weight
3-Point Hitch
Unified Inch Bolt and Screw Torque Values
Metric Bolt and Screw Torque Values
Section 18 - Warranty
Product Warranty
John Deere, California and U.S. EPA Emission Control System
Warranty (Non-Road Diesel)
Tire Warranty
Limited Battery Warranty
Section 19 - John Deere Quality Statement
John Deere Quality
Section 20 - Service Record
Record Service Dates