OMMT6354

Issue A9

2500 Professional Greensmower

Gas PIN (010001-)

Diesel PIN (010001-)

Introduction

Safety Signs

Controls

Operating Machine

Operating Cutting Units

Replacement Parts

Service Machine Safely

Service Interval

Servicing Your Machine

Daily-Greensmower

Daily-Cutting Units

Break In - After First 20 Hours

Every 25 Hours

Break In - After First 50 Hours

Every 50 Hours

Every 100 Hours

Every 200 Hours

Every 600 Hours

As Needed

Yearly

Service Lubrication

Service Engine Gas Units

Service Engine Diesel Units

Service Hydraulics & Transmission

Service Cutting Units

Service Electrical

Service Miscellaneous

Troubleshooting

Storing Machine

Assembly

Specifications

Warranty

John Deere Service Literature

John Deere Quality Statement

Copyright© Deere & Company

Service Interval

Servicing Your Machine

Please use the following timetables to perform routine maintenance on your machine.

Daily-Greensmower

· Check fuel tank, fill if necessary.

· Check engine oil level.

· Check hydraulic oil level.

· Check coolant levels.

· Check and clean grill screen.

· Check for oil leaks.

· Check brake pedal operation.

· Check forward/reverse travel pedal operation.

· Diesel Model: Check air restriction indicator.

· Diesel Model: Check rubber dust unloading valve.

· Diesel Model: Check fuel sediment bowl.

· Test safety systems.

Daily-Cutting Units

· Lubricate front and rear rollers (12 places).

· Lubricate cutting reel roller bearings (6 places).

Break In - After First 20 Hours

· Check for loose hardware.

· Check tire pressure.

Every 25 Hours

· Gas Model: Clean air cleaner element-foam precleaner.

Break In - After First 50 Hours

· Change engine oil and filter.

· Tighten wheel nuts and bolts.

· Change hydraulic oil filter.

Every 50 Hours

· Check tire pressure.

· Lubricate cutting unit yoke pivots (3 places).

· Lubricate lift arm pivots (3 places).

· Lubricate rear axle pivot spindle (1 place).

· Lubricate rear axle wheel bearings (1 place).

· Lubricate neutral eccentric (1 place).

Every 100 Hours

· Tighten wheel bolts and nuts.

Every 200 Hours

· Change engine oil and filter.

· Diesel Model: Clean fuel sediment bowl.

· Diesel Model: Check alternator belt wear and tension.

· Gas Model: Check fan belt wear and tension.

· Check air intake and cooling hose clamps.

· Clean radiator cooling fins and oil cooler coils.

· Gas Model: Replace air cleaner paper element.

Every 600 Hours

· Change hydraulic oil and filter.

· Clean hydraulic suction line strainer.

· Change coolant¹.

· Gas Model: Check spark plugs.

· Diesel Model: Replace fuel filter and clean sediment bowl.

· Check park brake adjustment.

· Check fuel injectors. (See your John Deere dealer.)

· Check valve clearance. (See your John Deere dealer.)

As Needed

· Adjust transmission neutral.

· Adjust neutral lock.

· Gas Model: Replace spark plugs.

· Gas Model: Replace fan belt.

· Diesel Model: Replace alternator belt.

· Diesel Model: Replace primary air cleaner element.

· Diesel Model: Replace secondary air cleaner element.

· Replace battery.

· Replace indicator light bulbs.

· Replace fuse.

· Replace radiator hoses.

· Adjust park brake.

Yearly

· Check coolant freeze point and clarity.

· Gas Model: Replace fuel filter.

· Clean battery.