200X and 200CX Loaders
Copyright 2010 © Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Dealer’s Record
Predelivery
Delivery
After-Sale
Record Product Identification Number
Keep Proof of Ownership
Keep Machines Secure
Section : 05-Safety
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Protect People and Animals
Help Prevent Rollovers
Avoid Injury or Death from Rollover Accidents
Avoid Power Lines
Dig Safely
Detach Loader Safely (200CX)
Keep Riders Off Machine
Operate Bucket/Attachment Safely
Carry Materials Safely
Safe Loader Operation on Slopes
Driving on Public Roads
Service Loader Safely
Check Hoses for Damage
Avoid High-Pressure Fluids
Store Attachments Safely
Section : 10-Safety Signs
Replace Safety Signs
Safety Sign Locations
Section : 15-Prepare the Tractor
Approved Tractors
Using Roll-Over Protective Structure (ROPS)
Keep ROPS Installed Properly
Removing Front Weights
Approved Front Tires
Inflating Front Tires
Setting Front Tread Width
Checking Front Wheel Hardware
Approved Rear Tires
Selecting Rear Tread Width
Required Minimum Tractor Ballast
Adding Ballast to Rear Wheels
Installing Hitch Pin Bushings on Ballast Box for Category 1 Quick Coupler Hitch
Attaching Ballast Box to Tractor with Three-Point Hitch
Attaching Ballast Box to Tractor with Quick Coupler Hitch
Adding Ballast to 3-Point Hitch
Section : 20-Detach Loader (200CX)
Attention: Do Not Detach 200X Loader
Removing Ballast Box
Detaching Loader
Section : 25-Attach Loader (200CX)
Preparing to Attach Loader
Attaching Loader
Checking Loader Operation
Section : 30-Transport
Carrying Loads
Keep Riders Off Machine
Driving on Public Roads
Section : 35-Operate Loader
Preoperating Checks
Using Ballast Box
Avoid Rollover Accidents
Do Not Handle Round or Large Square Bales
Using Bucket Level Indicator
Leveling and Scraping Forward
Leveling in Reverse
Carrying Material
Removing Material from a Pile
Loading Operations
Digging
Backfilling
Attaching and Detaching Attachment
Attachments Available
Section : 40-Lubrication and Maintenance
Lubricating and Maintaining Loader Safely
Perform Lubrication and Maintenance
Observe Lubrication Symbols
Grease
Alternative and Synthetic Lubricants
First 10 Hours
Every 10 Hours
Every 50 Hours
Section : 45-Service
Servicing Loader and/or Tractor Safely (Loader Attached)
Keep Service Area Clean
Avoid High-Pressure Fluids
O-Ring Installation
Tightening Procedure for Fittings
Accessing Front of Tractor (2210, 2305, 2320, 2520 and 2720 Tractors)
Identifying Hose Connections
Replacing Orifice
Adjusting Bucket Level Indicator
Metric Bolt and Screw Torque Values
Unified Inch Bolt and Screw Torque Values
Section : 50-Assembly
Perform Predelivery Service Safely
Installation Instructions Available Online to John Deere Dealers
Prepare For Assembly
Recommended Set Up/Assembly Sequence
Prepare the Tractor
Prepare the Loader
Attach Loader to Tractor—200X
Attach Loader to Tractor—200CX
Final Inspection and Adjustments
Install Optional Equipment/Attachments
Section : IBC-John Deere Service Keeps You On The Job
John Deere Is At Your Service