300F
Support Wheel
Copyright 2012 © Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Section 00 - Identification View
Identification View
Section 05 - Safety
Recognize Safety Information
Follow Safety Instructions
Understand Signal Words
Check Machine Safety
Use Safety Lights and Devices
Ballasting for Safe Ground Contact
Observe Road Traffic Regulations
Prevent Machine Runaway
Road Safety Switch
Danger of Falling
Retighten Wheel Nuts
Prepare for Emergencies
Wear Protective Clothing
Guards and Shields
Practice Safe Maintenance
Support Machine Properly
Avoid High-Pressure Fluids
Remove Paint Before Welding or Heating
Section 10 - Safety Decals
Safety Decals
Section 15 - Attaching
Compatibility Chart
Ballasting the Forage Harvester
Prior to Attaching
Automatic Support Wheel Identification
Attaching to a Rotary Harvesting Unit with AHC (Option)
Unfold the Rotary Harvesting Unit
Attach Support Wheel
Locking Device Position
Adjust Locking Device (Only for Initial Use)
Lock Support Wheel
Locking Status Indicator
Section 20 - Detaching
Detach Support Wheel
Park Support Wheel Together with Rotary Harvesting Unit
Section 25 - Support Wheel Operation
Adjust Return To Pressure
Driving on Roads
Section 30 - Ballasting
Ballasting
Ballasting Chart—710 to John Deere 7400 - 7550 without
40 km/h (25 mph) ProDrive™ Transmission (Standard or Heavy-Duty
Rear Axle)
Ballasting Chart—710 to John Deere 7400 - 7550 without
40 km/h (25 mph) ProDrive™ Transmission (Powered Rear Axle)
Ballasting Chart—710 to John Deere 7700 - 7850 without
40 km/h (25 mph) ProDrive™ Transmission (Standard or Heavy-Duty
Rear Axle)
Ballasting Chart—710 to John Deere 7700 - 7850 without
40 km/h (25 mph) ProDrive™ Transmission (Powered Rear Axle)
Ballasting Chart—710 to John Deere 7400 - 7850 with 40
km/h (25 mph) ProDrive™ Transmission (Without Liquid Ballast
in Rear Tires)
Ballasting Chart—710 to John Deere 7400 - 7850 with 40
km/h (25 mph) ProDrive™ Transmission (With Liquid Ballast in
Rear Tires)
Ballasting Chart – 698 to John Deere 7200 - 7850 with
Liquid Ballast in Rear Tires
Ballasting Chart – 690 to John Deere 7300 - 7980 with
Liquid Ballast in Rear Tires
Ballasting Chart – 692 to John Deere 7700 - 7980 with
Liquid Ballast in Rear Tires
Section 35 - Wheels
Service Tires Safely
Wheel Bolts and Nuts
Tire Size
Tire Inflation Pressures
Section 40 - Troubleshooting
300F Support Wheel
Section 45 - Lubrication and Maintenance
Metric Bolt and Screw Torque Values
Service Intervals
Grease
Every 10 Hours - Hook and Locking Devices
Every 50 Hours - Wheel Nuts
Every 50 Hours - Wheel Bolts
Every 50 Hours - Swivel
Check and Adjust Sensors
Section 50 - Specifications
300F Support Wheel
Section 55 - Serial Number
Support Wheel Serial Number Plate
Serial Number